Re: Help needed with MTD on AT91SAM9263-EK please.

[James <jamessteward@optusnet.com.au>]

On Wed, 2008-05-28 at 08:24 +0200, Richard Genoud wrote:
> > So, a page at a time seems ok?
> yes, all those writings are ok, maybe you can try with
> if=/dev/urandom, just to see if the OOB region is updated

root@at91sam9263ek:~/mtd-tools$ ./flash_eraseall /dev/mtd0
Erasing 128 Kibyte @ 3ee0000 -- 99 % complete.
root@at91sam9263ek:~/mtd-tools$ dd if=/dev/urandom bs=2k count=1
of=/dev/mtd0
1+0 records in
1+0 records out
root@at91sam9263ek:~/mtd-tools$ nanddump -p -l2048 /dev/mtd0
ECC failed: 0
ECC corrected: 0
Number of bad blocks: 0
Number of bbt blocks: 0
Block size 131072, page size 2048, OOB size 64
Dumping data starting at 0x00000000 and ending at 0x00000800...
0x00000000: b6 3c bb 90 16 c3 16 63 ab 8a b4 9f f3 bb 22 49
0x00000010: 42 9d 48 09 4c 35 f1 51 ec 3d e6 cd 3c f0 c7 87
<snip>
0x000007e0: 9f e4 a6 a7 47 35 5b be 12 3e 36 f6 f5 ef e5 5a
0x000007f0: 5b 3e bd 51 27 37 18 cc ab d8 e3 f7 36 09 c2 31
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  OOB Data: ff ff ff ff ff ff ff ff 0c 0f 0f ff cf 0f ff 30
  OOB Data: 0f 95 aa 97 c0 c0 ff 59 69 ab 3f 0c cf 65 9a a7

So some OOB data is written.

I don't know what to expect really.  I have soft ECC enabled, and after
reading a bit of the kernel mtdnand documentation, this appears normal.

So, do you think this is a hardware timing issue?  Maybe back to back
writes/reads?

Regards,
James.