From: Bryan Wu <cooloney@kernel.org>
To: dwmw2@infradead.org, akpm@linux-foundation.org
Cc: Bryan Wu <cooloney@kernel.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] [MTD] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function
Date: Sun, 27 Jul 2008 14:27:59 +0800 [thread overview]
Message-ID: <1217140079-20014-8-git-send-email-cooloney@kernel.org> (raw)
In-Reply-To: <1217140079-20014-1-git-send-email-cooloney@kernel.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
drivers/mtd/nand/bf5xx_nand.c | 38 ++++++++++++++++++++++++--------------
1 files changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 6cf7fb8..9af2a2c 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -549,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
/*
* System initialization functions
*/
-
static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
{
int ret;
@@ -582,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
return 0;
}
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+ /* Free NFC DMA channel */
+ if (hardware_ecc)
+ free_dma(CH_NFC);
+}
+
/*
* BF5XX NFC hardware initialization
* - pin mux setup
@@ -658,6 +664,7 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
}
peripheral_free_list(bfin_nfc_pin_req);
+ bf5xx_nand_dma_remove(info);
/* free the common resources */
kfree(info);
@@ -683,21 +690,21 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "(%p)\n", pdev);
+ if (!plat) {
+ dev_err(&pdev->dev, "no platform specific information\n");
+ return -EINVAL;
+ }
+
if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
dev_err(&pdev->dev, "requesting Peripherals failed\n");
return -EFAULT;
}
- if (!plat) {
- dev_err(&pdev->dev, "no platform specific information\n");
- goto exit_error;
- }
-
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
- goto exit_error;
+ goto out_err_kzalloc;
}
platform_set_drvdata(pdev, info);
@@ -741,8 +748,8 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
/* initialise the hardware */
err = bf5xx_nand_hw_init(info);
- if (err != 0)
- goto exit_error;
+ if (err)
+ goto out_err_hw_init;
/* setup hardware ECC data struct */
if (hardware_ecc) {
@@ -772,7 +779,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
/* scan hardware nand chip and setup mtd info data struct */
if (nand_scan(mtd, 1)) {
err = -ENXIO;
- goto exit_error;
+ goto out_err_nand_scan;
}
/* add NAND partition */
@@ -781,11 +788,14 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "initialised ok\n");
return 0;
-exit_error:
- bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+ bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+ platform_set_drvdata(pdev, NULL);
+ kfree(info);
+out_err_kzalloc:
+ peripheral_free_list(bfin_nfc_pin_req);
- if (err == 0)
- err = -EINVAL;
return err;
}
--
1.5.6
prev parent reply other threads:[~2008-07-27 6:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-27 6:27 [PATCH 0/7] Blackfin on-chip NAND Flash Controller driver updates for 2.6.27 Bryan Wu
2008-07-27 6:27 ` [PATCH 1/7] [MTD] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages Bryan Wu
2008-07-27 6:27 ` [PATCH 2/7] [MTD] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 Bryan Wu
2008-07-27 6:27 ` [PATCH 3/7] [MTD] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses Bryan Wu
2008-07-27 6:27 ` [PATCH 4/7] [MTD] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions Bryan Wu
2008-07-27 6:27 ` [PATCH 5/7] [MTD] Blackfin NFC Driver: enable Blackfin nand HWECC support by default Bryan Wu
2008-07-27 6:27 ` [PATCH 6/7] [MTD] Blackfin NFC Driver: use standard dev_err() rather than printk() Bryan Wu
2008-07-27 6:27 ` Bryan Wu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1217140079-20014-8-git-send-email-cooloney@kernel.org \
--to=cooloney@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox