From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.nokia.com ([192.100.122.230] helo=mgw-mx03.nokia.com) by bombadil.infradead.org with esmtps (Exim 4.68 #1 (Red Hat Linux)) id 1LCqu1-0001pF-9p for linux-mtd@lists.infradead.org; Wed, 17 Dec 2008 07:33:05 +0000 Subject: Re: UBIFS failures From: Artem Bityutskiy To: Bruce_Leonard@selinc.com In-Reply-To: <1229498337.17960.15.camel@sauron> References: <1229498337.17960.15.camel@sauron> Content-Type: text/plain; charset=UTF-8 Date: Wed, 17 Dec 2008 09:27:51 +0200 Message-Id: <1229498871.17960.21.camel@sauron> Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Cc: Barry_Grussling@selinc.com, linux-mtd Reply-To: dedekind@infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Wed, 2008-12-17 at 09:18 +0200, Artem Bityutskiy wrote: > Hi, >=20 > On Tue, 2008-12-16 at 15:20 -0800, Bruce_Leonard@selinc.com wrote: > > > 1154 with dirty 115584 and free 0 > > UBIFS DBG (pid 361): ubifs_tnc_start_commit: number of index LEBs 15 > > UBIFS DBG (pid 361): ubifs_tnc_start_commit: size of index 466936 > > UBIFS DBG (pid 361): get_cnodes_to_commit: committing 403 cnodes > > UBIFS error (pid 361): alloc_lpt_leb: last LEB 8 > > Call Trace: > > [df04bbb0] [c0007e64] show_stack+0x58/0x154 (unreliable) > > [df04bbf0] [c0120680] alloc_lpt_leb+0x160/0x17c > > [df04bc10] [c0122038] ubifs_lpt_start_commit+0x7dc/0xad4 > > [df04bc50] [c010c5b4] do_commit+0x130/0x77c > > [df04bcd0] [c011f37c] ubifs_rcvry_gc_commit+0x6d4/0x71c > > [df04bd10] [c00fc21c] ubifs_fill_super+0xc6c/0x1820 > > [df04bda0] [c00fdf10] ubifs_get_sb+0x318/0x37c > > [df04be20] [c006d278] vfs_kern_mount+0xa0/0x138 > > [df04be50] [c006d360] do_kern_mount+0x40/0xf4 > > [df04be70] [c008795c] do_new_mount+0x6c/0xb8 > > [df04be90] [c0087b58] do_mount+0x1b0/0x1dc > > [df04bf10] [c0087c18] sys_mount+0x94/0xe8 > > [df04bf40] [c000f234] ret_from_syscall+0x0/0x38 > >=20 > Is it possible for you to share the UBIFS image so that I could > reproduce the problem here (on nandsim) and investigate it? I would be good if the answer was "yes". And if it is, then I need: 1. Information about your MTD/UBI setup: 1.1 cat /proc/mtd 1.2 ubinfo -a 2. UBIFS image: just do dd if=3D/dev/ubi0_Y of=3Dubifs.img bs=3D4096 where /dev/ubi0_Y is the UBI volume node corresponding to the "ubi0:database" volume. --=20 Best regards, Artem Bityutskiy (=D0=91=D0=B8=D1=82=D1=8E=D1=86=D0=BA=D0=B8=D0=B9 =D0=90= =D1=80=D1=82=D1=91=D0=BC)