From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: RE: MLC Support in JFFS2 From: Artem Bityutskiy To: apgmoorthy In-Reply-To: References: <1C48A8694DD447A0A922790E587F7D5F@sisodomain.com> <4A3F3718.1070102@gmail.com> Content-Type: text/plain; charset="UTF-8" Date: Mon, 22 Jun 2009 16:41:56 +0300 Message-Id: <1245678116.9487.46.camel@localhost.localdomain> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Cc: 'Amit Kumar Sharma' , vishak.g@samsung.com, 'Artem Bityutskiy' , 'Amul Saha' , kyungmin.park@samsung.com, linux-mtd@lists.infradead.org, 'David Woodhouse' Reply-To: dedekind@infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Mon, 2009-06-22 at 19:03 +0530, apgmoorthy wrote: > Yes it do that . > There are two things in Handling MLCs > 1.Paired Page Handling > This is done in Flex-OneNAND Driver. > flexonenand_lsb_page_recovery will handle that in MLC area. Ah, ok you do this at the driver level - good. > 2.NOP==1 > This scenario has to be dealt in synchronization with JFFS2. > This is what i asked about. > Pathces , in the links(above)are addressing this. OK, I see. -- Best regards, Artem Bityutskiy (Битюцкий Артём)