Re: ubiattach problem

[Artem Bityutskiy <dedekind@infradead.org>]

On Mon, 2009-07-06 at 16:50 +0300, Oren wrote:
> HI,
> 
> I am trying to attached a ubi image to an MTD nand device.
> I am using kerenl version 2.6.27.18.
> using latest MTD-UTILS + ubi_utils.
> 
> For some reosone i get UBI error while trying to attache..
> DO i miss someting?
> 
> 
> dev:    size   erasesize  name
> mtd0: 01000000 00020000 "NAND-block1"
> mtd1: 01e00000 00020000 "jffs2"
> mtd2: 05200000 00020000 "NAND-block2"
> ./ubinfo
> UBI version:                    1
> Count of UBI devices:           0
> UBI control device major/minor: 10:63
> ubiformat /dev/mtd0 -s 2048 -f ubi_ncomp.img
> ubiformat: mtd0 (nand), size 16777216 bytes (16.0 MiB), 128 eraseblocks
> of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
> libscan: scanning eraseblock 127 -- 100 % complete  
> ubiformat: 128 eraseblocks are supposedly empty
> ubiformat: flashing eraseblock 16 -- 100 % complete  
> ubiformat: formatting eraseblock 127 -- 100 % complete
> ubiattach /dev/ubi_ctrl -m 0  
> [42949485.550000] UBI error: ubi_read_volume_table: the layout volume
> was not found
> [42949485.560000] UBI error: ubi_attach_mtd_dev: failed to attach by
> scanning, error -22
> ubiattach: error!: cannot attach mtd0
>            error 22 (Invalid argument)

Looks strange. Does dmesg has anything interesting when you enable
UBI debugging?
(http://www.linux-mtd.infradead.org/doc/ubi.html#L_how_send_bugreport)

-- 
Best regards,
Artem Bityutskiy (Битюцкий Артём)