From: Justin Treon <justin_treon@yahoo.com>
To: linux-mtd@lists.infradead.org
Cc: nico@cam.org
Subject: [PATCH] MTD: Unlocking all Intel flash that is locked on power up. Try 3
Date: Mon, 19 Nov 2007 13:59:17 -0800 (PST) [thread overview]
Message-ID: <125146.90876.qm@web43134.mail.sp1.yahoo.com> (raw)
This is the third submission of the patch for unlocking all Intel flash that is
locked on power up. The patch has been tested on Intel M18, P30 and J3D Strata
Flash.
1. The automatic unlocking can be disabled for a particular partition
in the map or the command line.
a. For the bit mask in the map it should look like:
.mask_flags = MTD_POWERUP_LOCK,
b. For the command line parsing it should look like:
mtdparts=0x80000(bootloader)lk
2. This will only unlock parts with instant individual block locking.
Intel parts with legacy unlocking will not be unlocked.
Diffstat of the patch:
drivers/mtd/chips/cfi_cmdset_0001.c | 20 +++++++++++++-------
drivers/mtd/cmdlinepart.c | 9 ++++++++-
drivers/mtd/mtdcore.c | 2 +-
include/mtd/mtd-abi.h | 2 +-
4 files changed, 23 insertions(+), 10 deletions(-)
Signed-off-by: Justin Treon <justin_treon@yahoo.com>
---
diff -r c105f44cf785 drivers/mtd/chips/cfi_cmdset_0001.c
--- a/drivers/mtd/chips/cfi_cmdset_0001.c Thu Nov 08 15:36:57 2007 -0800
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c Tue Nov 13 22:47:40 2007 -0800
@@ -226,10 +226,16 @@ static void fixup_use_write_buffers(stru
/*
* Some chips power-up with all sectors locked by default.
*/
-static void fixup_use_powerup_lock(struct mtd_info *mtd, void *param)
-{
- printk(KERN_INFO "Using auto-unlock on power-up/resume\n" );
- mtd->flags |= MTD_STUPID_LOCK;
+static void fixup_unlock_powerup_lock(struct mtd_info *mtd, void *param)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_intelext *cfip = cfi->cmdset_priv;
+
+ if (cfip->FeatureSupport&32) {
+ printk(KERN_INFO "Using auto-unlock on power-up/resume\n" );
+ mtd->flags |= MTD_POWERUP_LOCK;
+ }
}
static struct cfi_fixup cfi_fixup_table[] = {
@@ -244,7 +250,7 @@ static struct cfi_fixup cfi_fixup_table[
#endif
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct, NULL },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb, NULL },
- { MANUFACTURER_INTEL, 0x891c, fixup_use_powerup_lock, NULL, },
+ { MANUFACTURER_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock, NULL, },
{ 0, 0, NULL, NULL }
};
@@ -2273,7 +2279,7 @@ static int cfi_intelext_suspend(struct m
struct flchip *chip;
int ret = 0;
- if ((mtd->flags & MTD_STUPID_LOCK)
+ if ((mtd->flags & MTD_POWERUP_LOCK)
&& extp && (extp->FeatureSupport & (1 << 5)))
cfi_intelext_save_locks(mtd);
@@ -2384,7 +2390,7 @@ static void cfi_intelext_resume(struct m
spin_unlock(chip->mutex);
}
- if ((mtd->flags & MTD_STUPID_LOCK)
+ if ((mtd->flags & MTD_POWERUP_LOCK)
&& extp && (extp->FeatureSupport & (1 << 5)))
cfi_intelext_restore_locks(mtd);
}
diff -r c105f44cf785 drivers/mtd/cmdlinepart.c
--- a/drivers/mtd/cmdlinepart.c Thu Nov 08 15:36:57 2007 -0800
+++ b/drivers/mtd/cmdlinepart.c Thu Nov 15 17:18:11 2007 -0800
@@ -9,7 +9,7 @@
*
* mtdparts=<mtddef>[;<mtddef]
* <mtddef> := <mtd-id>:<partdef>[,<partdef>]
- * <partdef> := <size>[@offset][<name>][ro]
+ * <partdef> := <size>[@offset][<name>][ro][lk]
* <mtd-id> := unique name used in mapping driver/device (mtd->name)
* <size> := standard linux memsize OR "-" to denote all remaining space
* <name> := '(' NAME ')'
@@ -140,6 +140,13 @@ static struct mtd_partition * newpart(ch
if (strncmp(s, "ro", 2) == 0)
{
mask_flags |= MTD_WRITEABLE;
+ s += 2;
+ }
+
+ /* if lk is found do NOT unlock the MTD partition*/
+ if (strncmp(s, "lk", 2) == 0)
+ {
+ mask_flags |= MTD_POWERUP_LOCK;
s += 2;
}
diff -r c105f44cf785 drivers/mtd/mtdcore.c
--- a/drivers/mtd/mtdcore.c Thu Nov 08 15:36:57 2007 -0800
+++ b/drivers/mtd/mtdcore.c Tue Nov 13 15:41:00 2007 -0800
@@ -59,7 +59,7 @@ int add_mtd_device(struct mtd_info *mtd)
/* Some chips always power up locked. Unlock them now */
if ((mtd->flags & MTD_WRITEABLE)
- && (mtd->flags & MTD_STUPID_LOCK) && mtd->unlock) {
+ && (mtd->flags & MTD_POWERUP_LOCK) && mtd->unlock) {
if (mtd->unlock(mtd, 0, mtd->size))
printk(KERN_WARNING
"%s: unlock failed, "
diff -r c105f44cf785 include/mtd/mtd-abi.h
--- a/include/mtd/mtd-abi.h Thu Nov 08 15:36:57 2007 -0800
+++ b/include/mtd/mtd-abi.h Fri Nov 09 10:43:28 2007 -0800
@@ -29,7 +29,7 @@ struct mtd_oob_buf {
#define MTD_WRITEABLE 0x400 /* Device is writeable */
#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */
#define MTD_NO_ERASE 0x1000 /* No erase necessary */
-#define MTD_STUPID_LOCK 0x2000 /* Always locked after reset */
+#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */
// Some common devices / combinations of capabilities
#define MTD_CAP_ROM 0
____________________________________________________________________________________
Be a better pen pal.
Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/
next reply other threads:[~2007-11-19 21:59 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-19 21:59 Justin Treon [this message]
2007-11-20 2:59 ` [PATCH] MTD: Unlocking all Intel flash that is locked on power up. Try 3 Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=125146.90876.qm@web43134.mail.sp1.yahoo.com \
--to=justin_treon@yahoo.com \
--cc=linux-mtd@lists.infradead.org \
--cc=nico@cam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox