From mboxrd@z Thu Jan 1 00:00:00 1970 Subject: Re: [PATCH 1/3] eLBC NAND: increase bus timeout to maximum From: Artem Bityutskiy To: Scott Wood In-Reply-To: <20091113201216.GA8313@loki.buserror.net> References: <20091113201216.GA8313@loki.buserror.net> Content-Type: text/plain; charset="UTF-8" Date: Mon, 23 Nov 2009 16:36:31 +0200 Message-Id: <1258986991.18407.14.camel@localhost> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Cc: linuxppc-dev@ozlabs.org, dwmw2@infradead.org, linux-mtd@lists.infradead.org Reply-To: dedekind1@gmail.com List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Fri, 2009-11-13 at 14:12 -0600, Scott Wood wrote: > When a NAND operation is in progress, all other localbus operations > (including NOR flash) will have to wait for access to the bus. However, the > NAND operation may take longer to complete than the default timeout. Thus, > if NOR is accessed while a NAND operation is in progress, the NAND operation > will fail. > > Signed-off-by: Scott Wood Taken the patches to my l2-mtd-2.6 tree. -- Best Regards, Artem Bityutskiy (Артём Битюцкий)