From: Maxim Levitsky <maximlevitsky@gmail.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Cc: joern <joern@logfs.org>,
linux-mtd <linux-mtd@lists.infradead.org>,
Alex Dubov <oakad@yahoo.com>
Subject: [PATCH 5/9] NAND: export nand_do_read_oob and nand_do_write_oob
Date: Wed, 06 Jan 2010 23:49:23 +0200 [thread overview]
Message-ID: <1262814563.14552.29.camel@maxim-laptop> (raw)
In-Reply-To: <1262814216.14552.22.camel@maxim-laptop>
>From 42a44a48f270f45e44595b6f3906df4a6cf28ba5 Mon Sep 17 00:00:00 2001
From: Maxim Levitsky <maximlevitsky@gmail.com>
Date: Tue, 5 Jan 2010 23:25:20 +0200
Subject: [PATCH 5/9] NAND: export nand_do_read_oob and nand_do_write_oob
Drivers might need sane way to read/write oob area, but can't
use mtd interface due to locking
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/mtd/nand/nand_base.c | 10 +++++-----
include/linux/mtd/nand.h | 7 +++++++
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 2957cc7..787e751 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -99,9 +99,6 @@ static struct nand_ecclayout nand_oob_128 = {
static int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd,
int new_state);
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
- struct mtd_oob_ops *ops);
-
/*
* For devices which display every fart in the system on a separate LED. Is
* compiled away when LED support is disabled.
@@ -1458,7 +1455,7 @@ static int nand_write_oob_syndrome(struct mtd_info *mtd,
*
* NAND read out-of-band data from the spare area
*/
-static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
int page, realpage, chipnr, sndcmd = 1;
@@ -1993,7 +1990,7 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
*
* NAND write out-of-band
*/
-static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
int chipnr, page, status, len;
@@ -2962,6 +2959,9 @@ EXPORT_SYMBOL_GPL(nand_scan);
EXPORT_SYMBOL_GPL(nand_scan_ident);
EXPORT_SYMBOL_GPL(nand_scan_tail);
EXPORT_SYMBOL_GPL(nand_release);
+EXPORT_SYMBOL_GPL(nand_do_read_oob);
+EXPORT_SYMBOL_GPL(nand_do_write_oob);
+
static int __init nand_base_init(void)
{
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7a232a9..7c3ff57 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -548,6 +548,13 @@ extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t * retlen, uint8_t * buf);
+extern int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
+
+extern int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
+
+
/*
* Constants for oob configuration
*/
--
1.6.3.3
next prev parent reply other threads:[~2010-01-06 21:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 21:43 RFC: [PATCH 0/9 Integration of SmartMedia/xD into mtd subsystem Maxim Levitsky
2010-01-06 21:44 ` [PATCH 1/9] MTD: call remove notifiers before removing the device Maxim Levitsky
2010-01-06 21:45 ` [PATCH 2/9] MTD: create lockless versions of {get,put}_mtd_device Maxim Levitsky
2010-01-06 21:46 ` [PATCH 3/9] MTD: blkdevs: major cleanups Maxim Levitsky
2010-01-06 21:48 ` [PATCH 4/9] mtd-make mtdtrans thread suspend friendly Maxim Levitsky
2010-01-06 21:49 ` Maxim Levitsky [this message]
2010-01-06 21:51 ` [PATCH 6/9] mtd: common module for smartmedia/xD support Maxim Levitsky
2010-01-06 21:52 ` [PATCH 7/9] NAND: add few workarounds for SmartMedia/xD chips Maxim Levitsky
2010-01-06 21:53 ` [PATCH 8/9] mtd: SmartMedia/xD FTL Maxim Levitsky
2010-01-06 21:54 ` [PATCH 9/9] mtd: add nand driver for ricoh xD/SmartMedia reader Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1262814563.14552.29.camel@maxim-laptop \
--to=maximlevitsky@gmail.com \
--cc=joern@logfs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=oakad@yahoo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox