From: Artem Bityutskiy <dedekind1@gmail.com>
To: Anatolij Gustschin <agust@denx.de>
Cc: John Rigby <jcrigby@gmail.com>, Piotr Ziecik <kosmo@semihalf.com>,
Detlev Zundel <dzu@denx.de>,
Grant Likely <grant.likely@secretlab.ca>,
linuxppc-dev@ozlabs.org, linux-mtd@lists.infradead.org,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH v4 04/11] mtd: Add MPC5121 NAND Flash Controller driver
Date: Tue, 16 Feb 2010 10:11:08 +0200 [thread overview]
Message-ID: <1266307868.11659.177.camel@localhost> (raw)
In-Reply-To: <1266255305-29224-1-git-send-email-agust@denx.de>
On Mon, 2010-02-15 at 18:35 +0100, Anatolij Gustschin wrote:
> Adds NAND Flash Controller driver for MPC5121 Revision 2.
> All device features, except hardware ECC and power management,
> are supported.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> Cc: <linux-mtd@lists.infradead.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
> ---
> Changes since v3:
> - include 'asm/mpc5121.h' header instead of 'asm/mpc5xxx.h'.
> This change is needed because arch patch adding reset
> module definition was reworked and doesn't add mpc5121
> specific definitions to common header for mpc52xx/mpc5121.
>
> Changes since v2:
> - move the arch bits into separate patch
> (it is the next patch in this series now)
> - use __devinit/__devexit/__devexit_p and __devinitdata
>
> Changes since v1:
> - add logfile with changes since previous version
>
> Changes since the patch version submitted in May 2009:
>
> - move mpc5121_nfc.h to the driver .c as there is only one user
> - remove DRV_VERSION macro
> - replace printk() by dev_*()
> - drop unnecessary .suspend and .resume initializations
> - remove duplicate .name/.owner settings
> - fix mpc5121_nfc_init() to "return of_register_platform_driver(&mpc5121_nfc_driver);"
> - move module_init() to just below the init function
> - remove MODULE_VERSION
> - use "mtd: Add MPC5121 NAND Flash Controller driver" as the subject,
> previously it was "mpc5121: Added NAND Flash Controller driver.
>
> drivers/mtd/nand/Kconfig | 7 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/mpc5121_nfc.c | 916 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 924 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mtd/nand/mpc5121_nfc.c
Pushed to my l2-mtd-2.6.git / dunno.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2010-02-16 8:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-05 13:42 [PATCH v3 00/11] Update support for MPC512x Anatolij Gustschin
2010-02-05 13:42 ` [PATCH v3 04/11] mtd: Add MPC5121 NAND Flash Controller driver Anatolij Gustschin
2010-02-10 2:42 ` Grant Likely
2010-03-30 13:15 ` Artem Bityutskiy
2010-02-15 17:35 ` [PATCH v4 " Anatolij Gustschin
2010-02-16 8:11 ` Artem Bityutskiy [this message]
2010-02-23 15:54 ` Kári Davíðsson
2010-02-09 8:48 ` [PATCH v3 00/11] Update support for MPC512x Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266307868.11659.177.camel@localhost \
--to=dedekind1@gmail.com \
--cc=agust@denx.de \
--cc=dwmw2@infradead.org \
--cc=dzu@denx.de \
--cc=grant.likely@secretlab.ca \
--cc=jcrigby@gmail.com \
--cc=kosmo@semihalf.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox