From: Maxim Levitsky <maximlevitsky@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>,
Alex Dubov <oakad@yahoo.com>, Vitaly Wool <vitalywool@gmail.com>,
joern <joern@logfs.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
stanley.miao@windriver.com,
linux-mtd <linux-mtd@lists.infradead.org>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH 09/15] MTD: nand: cleanup the nand_do_write_ops
Date: Mon, 22 Feb 2010 20:39:36 +0200 [thread overview]
Message-ID: <1266863982-5258-10-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1266863982-5258-1-git-send-email-maximlevitsky@gmail.com>
nand_do_write_ops have broken in regard to writing several pages,
each with its own oob.
Although nand_do_write_ops intends to allow such mode, it fails do do so
Probably this was never tested.
Also add missing checks for attemts to write at illegal offsets.
Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
drivers/mtd/nand/nand_base.c | 24 +++++++++++++++++-------
1 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index cada4cf..1386741 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2072,11 +2072,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
* @oob: oob data buffer
* @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
- size_t len = ops->ooblen;
-
switch(ops->mode) {
case MTD_OOB_PLACE:
@@ -2131,6 +2129,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int chipnr, realpage, page, blockmask, column;
struct nand_chip *chip = mtd->priv;
uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+ uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
@@ -2172,6 +2175,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (likely(!oob))
memset(chip->oob_poi, 0xff, mtd->oobsize);
+ /* Don't allow multipage oob writes with offset */
+ if (ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+ return -EINVAL;
+
while(1) {
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
@@ -2187,8 +2194,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
wbuf = chip->buffers->databuf;
}
- if (unlikely(oob))
- oob = nand_fill_oob(chip, oob, ops);
+ if (unlikely(oob)) {
+ size_t len = min(oobwritelen, oobmaxlen);
+ oob = nand_fill_oob(chip, oob, len, ops);
+ oobwritelen -= len;
+ }
ret = chip->write_page(mtd, chip, wbuf, page, cached,
(ops->mode == MTD_OOB_RAW));
@@ -2362,7 +2372,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
chip->pagebuf = -1;
memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops);
+ nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
memset(chip->oob_poi, 0xff, mtd->oobsize);
--
1.6.3.3
next prev parent reply other threads:[~2010-02-22 18:41 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-22 18:39 [PATCH 0/15 V10] Work to enable SmartMedia/xD support in mtd Maxim Levitsky
2010-02-22 18:39 ` [PATCH 01/15] MTD: create unlocked versions of {get,put}_mtd_device Maxim Levitsky
2010-02-22 18:39 ` [PATCH 02/15] blktrans: remove mtd_blkcore_priv and switch to per device queue and thread Maxim Levitsky
2010-02-22 18:39 ` [PATCH 03/15] blktrans: Hotplug fixes Maxim Levitsky
2010-02-22 18:39 ` [PATCH 04/15] MTD: mtdblock: test return value of add_mtd_blktrans_dev, because if can fail Maxim Levitsky
2010-02-22 18:39 ` [PATCH 05/15] MTD: call the remove notifiers before assuming it is in use Maxim Levitsky
2010-02-22 18:39 ` [PATCH 06/15] blktrans: allow FTL drivers to export sysfs attributes Maxim Levitsky
2010-02-22 18:39 ` [PATCH 07/15] MTD: nand: make suspend work if device is accessed by kernel threads Maxim Levitsky
2010-02-22 18:39 ` [PATCH 08/15] MTD: nand: make MTD_OOB_PLACE work correctly Maxim Levitsky
2010-02-22 18:39 ` Maxim Levitsky [this message]
2010-02-22 18:39 ` [PATCH 10/15] MTD: nand: make reads using MTD_OOB_RAW affect only ECC validation Maxim Levitsky
2010-02-22 21:20 ` Thomas Gleixner
2010-02-22 21:28 ` Maxim Levitsky
2010-02-22 21:29 ` Thomas Gleixner
2010-02-22 21:34 ` Maxim Levitsky
2010-02-23 7:23 ` Maxim Levitsky
2010-02-23 18:32 ` Maxim Levitsky
2010-02-22 18:39 ` [PATCH 11/15] MTD: nand: add ->badblockbits to specify the minimum number of bits in bad block byte to consider the block good Maxim Levitsky
2010-02-22 18:39 ` [PATCH 12/15] MTD: common module for smartmedia/xD support Maxim Levitsky
2010-02-22 18:39 ` [PATCH 13/15] MTD: add few workarounds to nand system for SmartMedia/xD chips Maxim Levitsky
2010-02-22 21:25 ` Thomas Gleixner
2010-02-22 21:33 ` Maxim Levitsky
2010-02-22 21:53 ` Thomas Gleixner
2010-02-22 22:12 ` Maxim Levitsky
2010-02-22 18:39 ` [PATCH 14/15] MTD: Add new SmartMedia/xD FTL Maxim Levitsky
2010-02-22 18:39 ` [PATCH 15/15] MTD: Add nand driver for Ricoh xD/SmartMedia reader Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1266863982-5258-10-git-send-email-maximlevitsky@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=dwmw2@infradead.org \
--cc=joern@logfs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=oakad@yahoo.com \
--cc=stanley.miao@windriver.com \
--cc=tglx@linutronix.de \
--cc=vitalywool@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox