From: Artem Bityutskiy <dedekind1@gmail.com>
To: 林于峻 <okpalin@gmail.com>
Cc: linux-mtd@lists.infradead.org, Bosi Daniele <Daniele.Bosi@mta.it>,
GUIDA Nicola <Nicola.GUIDA@numonyx.com>
Subject: Re: Can not mount UBIFS
Date: Tue, 06 Apr 2010 12:00:58 +0300 [thread overview]
Message-ID: <1270544458.6754.15.camel@localhost> (raw)
In-Reply-To: <a145ef951003160113x7baea205i8deb13c14ba8e0de@mail.gmail.com>
On Tue, 2010-03-16 at 16:13 +0800, 林于峻 wrote:
> Dear all,
>
> I try to sync /driver/mtd/ubi/*, /fs/ubifs/*, and
> /include/linux/mtd/ubi.h with
> git://git.infradead.org/~dedekind/ubifs-v2.6.29.git
> But mount still fail.
> I will try nandsim latter.
>
> To get more information, I enable UBI and UBIFS debugging message,
> described below..
> I enable UBI debugging: UBI debugging messages, Extra self-check, and
> all Aditional UBI debugging messages.
> I also enable UBIFS: Enable debugging with message level 3 and Enable
> extra checks.
>
> Below are my entered command and debug message get from "adb logcat"
>
> My entered command:
> # cat /proc/mtd
> cat /proc/mtd
> dev: size erasesize name
> mtd0: 00500000 00020000 "recovery"
> mtd1: 00800000 00020000 "boot"
> mtd2: 077a0000 00020000 "system"
> mtd3: 02000000 00020000 "cache"
> mtd4: 14b00000 00020000 "userdata"
>
> # flash_eraseall /dev/mtd/mtd3
> flash_eraseall /dev/mtd/mtd3
> Erasing 128 Kibyte @ 2000000 -- 100 % complete.
>
> # ubiattach /dev/ubi_ctrl -m 3
> ubiattach /dev/ubi_ctrl -m 3
> UBI device number 0, total 256 LEBs (32505856 bytes, 31.0 MiB),
> available 250 LEBs (31744000 bytes, 30.3 MiB), LEB size 126976 bytes
> (124.0 KiB)
>
> # ubinfo
> ubinfo
> UBI version: 1
> Count of UBI devices: 1
> UBI control device major/minor: 10:57
> Present UBI devices: ubi0
>
> # ubimkvol /dev/ubi0 -N rootfs -s 10MiB
> ubimkvol /dev/ubi0 -N rootfs -s 10MiB
> Volume ID 0, size 83 LEBs (10539008 bytes, 10.1 MiB), LEB size
> 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
>
> # ubinfo -a
> ubinfo -a
> UBI version: 1
> Count of UBI devices: 1
> UBI control device major/minor: 10:57
> Present UBI devices: ubi0
>
> ubi0
> Volumes count: 1
> Logical eraseblock size: 126976 bytes, 124.0 KiB
> Total amount of logical eraseblocks: 256 (32505856 bytes, 31.0 MiB)
> Amount of available logical eraseblocks: 167 (21204992 bytes, 20.2 MiB)
> Maximum count of volumes 128
> Count of bad physical eraseblocks: 0
> Count of reserved physical eraseblocks: 2
> Current maximum erase counter value: 2
> Minimum input/output unit size: 2048 bytes
> Character device major/minor: 249:0
> Present volumes: 0
>
> Volume ID: 0 (on ubi0)
> Type: dynamic
> Alignment: 1
> Size: 83 LEBs (10539008 bytes, 10.1 MiB)
> State: OK
> Name: rootfs
> Character device major/minor: 249:1
>
> # mount -t ubifs ubi0_0 /cache
> mount -t ubifs ubi0_0 /cache
> mount: Invalid argument
>
> # mount -t ubifs ubi0:rootfs /cache
> mount -t ubifs ubi0:rootfs /cache
> mount: Invalid argument
>
> Debug message from "adb logcat":
> <7>UBIFS DBG (pid 1378): ubifs_get_sb: name ubi0:rootfs, flags 0x8000
> <7>UBI DBG (pid 1378): ubi_open_volume_path: open volume ubi0:rootfs, mode 1
> <7>UBI DBG (pid 1378): ubi_open_volume_nm: open device 0, volume rootfs, mode 1
> <7>UBI DBG (pid 1378): ubi_open_volume: open device 0, volume 0, mode 1
> <7>UBIFS DBG (pid 1378): ubifs_get_sb: opened ubi0_0
> <7>UBI DBG (pid 1378): ubi_open_volume: open device 0, volume 0, mode 2
> <7>UBI DBG (pid 1378): ubi_is_mapped: test LEB 0:0
> <7>UBIFS DBG (pid 1378): ubifs_read_node: LEB 0:0, superblock node, length 4096
> <7>UBI DBG (pid 1378): ubi_leb_read: read 4096 bytes from LEB 0:0:0
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 4096 bytes from offset 0
> of LEB 0:0, PEB 1
> <7>UBI DBG (pid 1378): ubi_io_read: read 4096 bytes from PEB 1:4096
> <7>UBIFS DBG (pid 1378): ubifs_start_scan: scan LEB 1:0
> <7>UBI DBG (pid 1378): ubi_leb_read: read 126976 bytes from LEB 0:1:0
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 126976 bytes from offset
> 0 of LEB 0:1, PEB 129
> <7>UBI DBG (pid 1378): ubi_io_read: read 126976 bytes from PEB 129:4096
> <7>UBIFS DBG (pid 1380): ubifs_bg_thread: background thread
> "ubifs_bgt0_0" started, PID 1380
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 1:0 (126976 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning master node
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 1:512 (126464 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning padding node
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: 1508 bytes padded, offset now 2048
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 1:2048 (124928 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning master node
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 1:2560 (124416 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning padding node
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: 1508 bytes padded, offset now 4096
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 1:4096 (122880 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: hit empty space
> <7>UBIFS DBG (pid 1378): ubifs_end_scan: stop scanning LEB 1 at offset 4096
> <7>UBIFS DBG (pid 1378): ubifs_start_scan: scan LEB 2:0
> <7>UBI DBG (pid 1378): ubi_leb_read: read 126976 bytes from LEB 0:2:0
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 126976 bytes from offset
> 0 of LEB 0:2, PEB 130
> <7>UBI DBG (pid 1378): ubi_io_read: read 126976 bytes from PEB 130:4096
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 2:0 (126976 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning master node
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 2:512 (126464 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning padding node
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: 1508 bytes padded, offset now 2048
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 2:2048 (124928 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning master node
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 2:2560 (124416 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: scanning padding node
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: 1508 bytes padded, offset now 4096
> <7>UBIFS DBG (pid 1378): ubifs_scan: look at LEB 2:4096 (122880 bytes left)
> <7>UBIFS DBG (pid 1378): ubifs_scan_a_node: hit empty space
> <7>UBIFS DBG (pid 1378): ubifs_end_scan: stop scanning LEB 2 at offset 4096
> <7>UBIFS DBG (pid 1378): ubifs_read_node: LEB 10:0, indexing node, length 48
> <7>UBI DBG (pid 1378): ubi_leb_read: read 48 bytes from LEB 0:10:0
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 48 bytes from offset 0
> of LEB 0:10, PEB 131
> <7>UBI DBG (pid 1378): ubi_io_read: read 48 bytes from PEB 131:4096
> <5>UBIFS: recovery needed
> <7>UBIFS DBG (pid 1378): ubifs_recover_inl_heads: checking index head at 10:2048
> <7>UBI DBG (pid 1378): ubi_leb_read: read 2048 bytes from LEB 0:10:2048
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 2048 bytes from offset
> 2048 of LEB 0:10, PEB 131
> <7>UBI DBG (pid 1378): ubi_io_read: read 2048 bytes from PEB 131:6144
> <7>UBIFS DBG (pid 1378): ubifs_recover_inl_heads: checking LPT head at 6:2048
> <7>UBI DBG (pid 1378): ubi_leb_read: read 2048 bytes from LEB 0:6:2048
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 2048 bytes from offset
> 2048 of LEB 0:6, PEB 2
> <7>UBI DBG (pid 1378): ubi_io_read: read 2048 bytes from PEB 2:6144
> <7>UBI DBG (pid 1378): ubi_leb_read: read 11 bytes from LEB 0:6:419
> <7>UBI DBG (pid 1378): ubi_eba_read_leb: read 11 bytes from offset 419
> of LEB 0:6, PEB 2
> <7>UBI DBG (pid 1378): ubi_io_read: read 11 bytes from PEB 2:4515
> <3>UBIFS error (pid 1378): check_lpt_type: invalid type (0) in LPT node type 2
Looks like your drive has problems with reading 11 bytes. Please,
validate it.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2010-04-06 9:02 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-11 7:43 Can not mount UBIFS 林于峻
2010-03-11 10:48 ` R: " Bosi Daniele
2010-03-11 12:33 ` 林于峻
2010-03-11 13:09 ` R: " Bosi Daniele
2010-03-16 8:13 ` 林于峻
2010-03-16 9:22 ` 林于峻
2010-04-06 9:00 ` Artem Bityutskiy [this message]
2010-05-03 11:54 ` 林于峻
2010-05-03 12:08 ` Artem Bityutskiy
2010-05-04 3:20 ` 林于峻
2010-05-11 3:46 ` 林于峻
2010-05-11 5:44 ` Artem Bityutskiy
2010-05-12 1:18 ` 林于峻
2010-05-12 3:30 ` Artem Bityutskiy
2010-04-06 8:48 ` Artem Bityutskiy
[not found] <mailman.11633.1268310802.2173.linux-mtd@lists.infradead.org>
2010-03-11 13:06 ` GUIDA, Nicola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270544458.6754.15.camel@localhost \
--to=dedekind1@gmail.com \
--cc=Daniele.Bosi@mta.it \
--cc=Nicola.GUIDA@numonyx.com \
--cc=linux-mtd@lists.infradead.org \
--cc=okpalin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).