From: Artem Bityutskiy <dedekind1@gmail.com>
To: Kyle Spaans <kspaans@uwaterloo.ca>
Cc: kernel-janitors@vger.kernel.org, linux-mtd@lists.infradead.org,
David Woodhouse <dwmw2@infradead.org>
Subject: Re: [PATCH] drivers/mtd: remove makefile subdirectory processing redundancies
Date: Wed, 21 Jul 2010 13:09:35 +0300 [thread overview]
Message-ID: <1279706975.2306.4.camel@localhost> (raw)
In-Reply-To: <20100720021718.GA32479@caffeine.csclub.uwaterloo.ca>
On Mon, 2010-07-19 at 22:17 -0400, Kyle Spaans wrote:
> > > +obj-$(CONFIG_MTD_TESTS) += tests/
> > > +obj-$(CONFIG_MTD_LPDDR) += lpddr/
> > > +obj-$(CONFIG_MTD_NAND) += nand/
> > > +obj-$(CONFIG_MTD_ONENAND) += onenand/
> > > obj-$(CONFIG_MTD_BI) += ubi/
> >
> > This cannot be right, because we have UBI, not 'BI'.
>
> Weird! Mutt seems to have mangled the patch on me. I must have pressed some
> buttons while composing the message. Try it now. Thanks! (Can I resubmit the
> patch like this, or does it need to go in its own email? I can't quite tell
> from looking at linux-mtd and lkml traffic.)
I see the following errors when I apply your patch to my l2-mtd-2.6 [1]
tree and compile on my x86_64 PC:
Kernel: arch/x86/boot/bzImage is ready (#4)
ERROR: "ubi_open_volume" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_leb_map" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_open_volume_nm" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_leb_change" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_leb_write" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_get_device_info" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_leb_read" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_leb_unmap" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_close_volume" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_get_volume_info" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_open_volume_path" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_sync" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_is_mapped" [fs/ubifs/ubifs.ko] undefined!
ERROR: "ubi_register_volume_notifier" [drivers/mtd/ubi/gluebi.ko]
undefined!
ERROR: "ubi_leb_read" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_leb_write" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_leb_erase" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_leb_unmap" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_open_volume" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_close_volume" [drivers/mtd/ubi/gluebi.ko] undefined!
ERROR: "ubi_unregister_volume_notifier" [drivers/mtd/ubi/gluebi.ko]
undefined!
ERROR: "onenand_scan" [drivers/mtd/onenand/onenand_sim.ko] undefined!
ERROR: "flexonenand_region" [drivers/mtd/onenand/onenand_sim.ko]
undefined!
ERROR: "onenand_addr" [drivers/mtd/onenand/onenand_sim.ko] undefined!
ERROR: "onenand_release" [drivers/mtd/onenand/onenand_sim.ko] undefined!
ERROR: "onenand_scan" [drivers/mtd/onenand/generic.ko] undefined!
ERROR: "onenand_release" [drivers/mtd/onenand/generic.ko] undefined!
ERROR: "nand_scan_tail" [drivers/mtd/nand/sm_common.ko] undefined!
ERROR: "nand_scan_ident" [drivers/mtd/nand/sm_common.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/r852.ko] undefined!
ERROR: "nand_scan" [drivers/mtd/nand/plat_nand.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/plat_nand.ko] undefined!
ERROR: "nand_default_bbt" [drivers/mtd/nand/nandsim.ko] undefined!
ERROR: "nand_scan" [drivers/mtd/nand/nandsim.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/nandsim.ko] undefined!
ERROR: "nand_scan" [drivers/mtd/nand/diskonchip.ko] undefined!
ERROR: "nand_scan_bbt" [drivers/mtd/nand/diskonchip.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/diskonchip.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/denali.ko] undefined!
ERROR: "nand_scan_tail" [drivers/mtd/nand/denali.ko] undefined!
ERROR: "nand_scan_ident" [drivers/mtd/nand/denali.ko] undefined!
ERROR: "nand_release" [drivers/mtd/nand/cafe_nand.ko] undefined!
ERROR: "nand_scan_tail" [drivers/mtd/nand/cafe_nand.ko] undefined!
ERROR: "nand_scan_ident" [drivers/mtd/nand/cafe_nand.ko] undefined!
ERROR: "nand_wait_ready" [drivers/mtd/nand/cafe_nand.ko] undefined!
ERROR: "lpddr_cmdset" [drivers/mtd/lpddr/qinfo_probe.ko] undefined!
WARNING: modpost: Found 10 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
[1] git://git.infradead.org/users/dedekind/l2-mtd-2.6.git
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2010-07-21 10:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-14 4:25 [PATCH] drivers/mtd: remove makefile subdirectory processing redundancies Kyle Spaans
2010-07-18 16:46 ` Artem Bityutskiy
2010-07-20 2:17 ` Kyle Spaans
2010-07-21 10:09 ` Artem Bityutskiy [this message]
2010-08-04 0:58 ` Kyle Spaans
2010-08-24 8:17 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279706975.2306.4.camel@localhost \
--to=dedekind1@gmail.com \
--cc=dwmw2@infradead.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=kspaans@uwaterloo.ca \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).