linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
To: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: 'Sneha Narnakaje' <nsnehaprabha@ti.com>,
	davinci-linux-open-source@linux.davincidsp.com,
	linux-mtd@lists.infradead.org,
	'Wolfram Sang' <w.sang@pengutronix.de>
Subject: RE: [RFC] nand/davinci: Fix comment to match the code
Date: Wed, 25 Aug 2010 15:55:06 +0300	[thread overview]
Message-ID: <1282740906.24044.210.camel@localhost> (raw)
In-Reply-To: <039d01cb4450$e8f7d6a0$bae783e0$@raj@ti.com>

On Wed, 2010-08-25 at 17:57 +0530, Sudhakar Rajashekhara wrote:
> > --- a/drivers/mtd/nand/davinci_nand.c
> > +++ b/drivers/mtd/nand/davinci_nand.c
> > @@ -369,8 +369,9 @@ compare:
> >  	 * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
> >  	 * begin trying to poll for the state, you may fall right out of your
> >  	 * loop without any of the correction calculations having taken place.
> > -	 * The recommendation from the hardware team is to wait till ECC_STATE
> > -	 * reads less than 4, which means ECC HW has entered correction state.
> > +	 * The recommendation from the hardware team is to initially delay as
> > +	 * long as ECC_STATE reads less than 4. After that, ECC HW has entered
> > +	 * correction state.
> >  	 */
> >  	do {
> >  		ecc_state = (davinci_nand_readl(info,
> > -- 
> 
> Thanks for pointing this out, but I have already corrected this and submitted
> the patch. Artem Bityutskity has pushed this patch to his l2-mtd-2.6 / master
> tree.

If you mean

commit 1c3275b656045aff9a75bb2c9f3251af1043ebb3
Author: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Date:   Tue Jul 20 15:24:01 2010 -0700

    mtd: nand: davinci: correct 4-bit error correction
    
    On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the
    4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and
    before waiting for the NAND Flash status register to be equal to 1, 2 or
    3, we have to wait till the ECC HW goes to correction state.  Without this
    wait, ECC correction calculations will not be proper.
    
    This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365
    EVMs.
    
    Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
    Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

then it is already in upstream in Linus' tree. I do not have anything else from you.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)

  reply	other threads:[~2010-08-25 12:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-25 12:18 [RFC] nand/davinci: Fix comment to match the code Wolfram Sang
2010-08-25 12:27 ` Sudhakar Rajashekhara
2010-08-25 12:55   ` Artem Bityutskiy [this message]
2010-08-25 13:30     ` Wolfram Sang
2010-08-26  3:59     ` Sudhakar Rajashekhara
2010-08-26  6:23       ` Wolfram Sang
2010-09-01  8:05       ` Wolfram Sang
2010-09-01 23:14 ` Artem Bityutskiy
2010-09-03 10:35   ` [PATCH] nand/davinci: relax a timeout for ECC-initialization Wolfram Sang
2010-09-03 11:12     ` Sudhakar Rajashekhara
2010-09-03 12:15       ` Wolfram Sang
2010-09-07  8:00     ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1282740906.24044.210.camel@localhost \
    --to=artem.bityutskiy@nokia.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=nsnehaprabha@ti.com \
    --cc=sudhakar.raj@ti.com \
    --cc=w.sang@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).