From: Artem Bityutskiy <dedekind1@gmail.com>
To: Anatolij Gustschin <agust@denx.de>
Cc: linux-mtd@lists.infradead.org, Detlev Zundel <dzu@denx.de>
Subject: Re: UBIFS partition on NOR flash not mountable after power cut test
Date: Thu, 02 Dec 2010 15:57:56 +0200 [thread overview]
Message-ID: <1291298276.2526.44.camel@localhost> (raw)
In-Reply-To: <20101202145027.266b30a6@wker>
On Thu, 2010-12-02 at 14:50 +0100, Anatolij Gustschin wrote:
> > Can you instead make mtd->writesize to be 64? This is much closer to the
> > "right thing to do" :-)
>
> Yes. But I also must ensure that the buffer size configured in
> cfi->cfiq->MaxBufWriteSize is actually used by the driver. This
> is not the case, it seems. If this is true, then I'll still run
> into the similar trouble even when using 64 for max_io_size in UBI.
Err, no, I think if the UBI/UBIFS min_io_size is greater than the real
write size, it should be fine for UBI/UBIFS. UBIFS should not get upset
if min_io_size is 64, but real write size is 8 or 16 or 32, or even 1
byte, I think.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
next prev parent reply other threads:[~2010-12-02 13:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-29 18:50 UBIFS partition on NOR flash not mountable after power cut test Anatolij Gustschin
2010-11-29 20:33 ` Mark Mason
2010-12-02 3:47 ` Artem Bityutskiy
2010-12-02 4:10 ` Mark Mason
2010-12-02 9:17 ` Detlev Zundel
2010-11-30 10:41 ` Norbert van Bolhuis
2010-11-30 15:35 ` Anatolij Gustschin
2010-12-01 9:38 ` Anatolij Gustschin
[not found] ` <AANLkTikEDQyNttTcKgHLwhR53sYSFbtVK-oy2S3END46@mail.gmail.com>
2010-12-01 9:47 ` Norbert van Bolhuis
2010-12-01 9:55 ` Anatolij Gustschin
[not found] ` <AANLkTikci0e2jaHCarA9HG86b_C-1UUcT_PMy-Q_mBrP@mail.gmail.com>
2010-12-01 13:06 ` Norbert van Bolhuis
2010-12-02 3:51 ` Artem Bityutskiy
2010-12-01 12:05 ` Anatolij Gustschin
2010-12-01 15:44 ` Anatolij Gustschin
2010-12-02 4:01 ` Artem Bityutskiy
2010-12-02 4:42 ` Artem Bityutskiy
2010-12-02 9:46 ` Matthieu CASTET
2010-12-02 12:18 ` Artem Bityutskiy
2010-12-02 9:57 ` Anatolij Gustschin
2010-12-02 12:18 ` Artem Bityutskiy
2010-12-02 13:23 ` Anatolij Gustschin
2010-12-02 13:35 ` Artem Bityutskiy
2010-12-02 13:50 ` Anatolij Gustschin
2010-12-02 13:57 ` Artem Bityutskiy [this message]
2010-12-02 14:18 ` Anatolij Gustschin
2010-12-03 10:07 ` Anatolij Gustschin
2010-12-03 10:23 ` Anatolij Gustschin
2010-12-03 10:28 ` Artem Bityutskiy
2010-12-03 10:41 ` Anatolij Gustschin
2010-12-03 10:49 ` Artem Bityutskiy
2010-12-03 11:15 ` Anatolij Gustschin
2010-12-02 3:46 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291298276.2526.44.camel@localhost \
--to=dedekind1@gmail.com \
--cc=agust@denx.de \
--cc=dzu@denx.de \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).