[PATCH 4/8] mtd: nand: rename NAND_USE_FLASH_BBT

Brian Norris
2011-05-31T23:31:23Z

Recall the recently added prefix requirements:
* "NAND_" for flags in nand.h, used in nand_chip.options
* "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options
or in nand_bbt_descr.options

Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH.

Again, this flag is found in bbm.h and so should NOT be used in the
"nand_chip.options" field.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
Documentation/DocBook/mtdnand.tmpl | 2 +-
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +-
arch/arm/mach-davinci/include/mach/nand.h | 2 +-
arch/arm/mach-orion5x/ts78xx-setup.c | 2 +-
arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 2 +-
arch/cris/arch-v32/drivers/mach-fs/nandflash.c | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
drivers/mtd/nand/autcpu12.c | 4 ++--
drivers/mtd/nand/bcm_umi_nand.c | 2 +-
drivers/mtd/nand/cafe_nand.c | 2 +-
drivers/mtd/nand/cs553x_nand.c | 2 +-
drivers/mtd/nand/davinci_nand.c | 2 +-
drivers/mtd/nand/denali.c | 2 +-
drivers/mtd/nand/diskonchip.c | 2 +-
drivers/mtd/nand/fsl_elbc_nand.c | 2 +-
drivers/mtd/nand/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/mxc_nand.c | 2 +-
drivers/mtd/nand/nand_base.c | 2 +-
drivers/mtd/nand/nand_bbt.c | 12 ++++++------
drivers/mtd/nand/nandsim.c | 2 +-
drivers/mtd/nand/pasemi_nand.c | 2 +-
drivers/mtd/nand/s3c2410.c | 2 +-
include/linux/mtd/bbm.h | 2 +-
31 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 05cc83e..8c07540 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)


The simplest way to activate the FLASH based bad block table support
- is to set the option NAND_USE_FLASH_BBT in the bbt_option field of
+ is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
the nand chip structure before calling nand_scan(). For AG-AND
chips is this done by default.
This activates the default FLASH based bad block table functionality
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 788adc8..80368a1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
.bbt_md = &da830_evm_nand_bbt_mirror_descr,
.timing = &da830_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 8bfad01..8bfde41 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -225,7 +225,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.ecc_bits = 4,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
};

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d857b70..530d44a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};

diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b24dfd0..971c4e0 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW_SYNDROME,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};

static struct resource davinci_nand_resources[] = {
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9a74857..1e4be46 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};

diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 012750f..e70cb0d 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -150,7 +150,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
};

diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index ba52254..7b57373 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -395,7 +395,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
};
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 89bf0b5..5eb8ef3 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
};

static struct resource davinci_ntosd2_nandflash_resource[] = {
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index f98896c..c5feb9b 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = {
.parts = nand_partitions,
.nr_parts = ARRAY_SIZE(nand_partitions),
.ecc_mode = NAND_ECC_HW,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 1,
};

diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index 2c506f9..1cf555a 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -76,7 +76,7 @@ struct davinci_nand_pdata { /* platform_data */

/* e.g. NAND_BUSWIDTH_16 */
unsigned options;
- /* e.g. NAND_USE_FLASH_BBT */
+ /* e.g. NAND_BBT_USE_FLASH */
unsigned bbt_options;

/* Main and mirror bbt descriptor overrides */
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index e5ca57c..8ae5301 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -275,7 +275,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
- .bbt_options = NAND_USE_FLASH_BBT,
+ .bbt_options = NAND_BBT_USE_FLASH,
},
.ctrl = {
/*
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index fdd11c1..7fb5212 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;

/* Enable the following for a flash based bad block table */
- /* this->bbt_options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */

/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index 3368177..e032384 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
this->ecc.mode = NAND_ECC_SOFT;

/* Enable the following for a flash based bad block table */
- /* this->bbt_options = NAND_USE_FLASH_BBT; */
+ /* this->bbt_options = NAND_BBT_USE_FLASH; */

/* Scan to find existence of the device */
if (nand_scan(crisv32_mtd, 1)) {
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 4afdc83..dc9b8d6 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -582,7 +582,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)

if (on_flash_bbt) {
printk(KERN_INFO "atmel_nand: Use On Flash BBT\n");
- nand_chip->bbt_options |= NAND_USE_FLASH_BBT;
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
}

if (!cpu_has_dma())
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index adf934d..2e42ec2 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -172,9 +172,9 @@ static int __init autcpu12_init(void)

/* Enable the following for a flash based bad block table */
/*
- this->bbt_options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
*/
- this->bbt_options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;

/* Scan to find existence of the device */
if (nand_scan(autcpu12_mtd, 1)) {
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 8ae9ad9..7ac8607 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -474,7 +474,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)

#if NAND_ECC_BCH
if (board_mtd->writesize > 512) {
- if (this->bbt_options & NAND_USE_FLASH_BBT)
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 7dd7d84..d0eed49 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -686,7 +686,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.chip_delay = 0;

/* Enable the following for a flash based bad block table */
- cafe->nand.bbt_options = NAND_USE_FLASH_BBT;
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS;

if (skipbbt) {
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 05adedd..b354961 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -239,7 +239,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
this->ecc.correct = nand_correct_data;

/* Enable the following for a flash based bad block table */
- this->bbt_options = NAND_USE_FLASH_BBT;
+ this->bbt_options = NAND_BBT_USE_FLASH;
this->options = NAND_NO_AUTOINCR;

/* Scan to find existence of the device */
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 69f7019..a4c82b4 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -581,7 +581,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
info->chip.chip_delay = 0;
info->chip.select_chip = nand_davinci_select_chip;

- /* options such as NAND_USE_FLASH_BBT */
+ /* options such as NAND_BBT_USE_FLASH */
info->chip.bbt_options = pdata->bbt_options;
/* options such as 16-bit widths */
info->chip.options = pdata->options;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index dbb6fba..ee30145 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1577,7 +1577,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali->nand.bbt_md = &bbt_mirror_descr;

/* skip the scan for now until we have OOB read and write support */
- denali->nand.bbt_options |= NAND_USE_FLASH_BBT;
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
denali->nand.options |= NAND_SKIP_BBTSCAN;
denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;

diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index f70bc73..b657d7f 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1652,7 +1652,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
- nand->bbt_options = NAND_USE_FLASH_BBT;
+ nand->bbt_options = NAND_BBT_USE_FLASH;

doc->physadr = physadr;
doc->virtadr = virtadr;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index a06b59c..f3384fa 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -792,7 +792,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)

/* set up nand options */
chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR;
- chip->bbt_options = NAND_USE_FLASH_BBT;
+ chip->bbt_options = NAND_BBT_USE_FLASH;

chip->controller = &elbc_fcm_ctrl->controller;
chip->priv = priv;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index d611542..e0e0846 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -736,7 +736,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op)
chip->verify_buf = mpc5121_nfc_verify_buf;
chip->select_chip = mpc5121_nfc_select_chip;
chip->options = NAND_NO_AUTOINCR;
- chip->bbt_options = NAND_USE_FLASH_BBT;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;

/* Support external chip-select logic on ADS5121 board */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index ed68fde..ca42c8f 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1179,7 +1179,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
/* update flash based bbt */
- this->bbt_options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
}

init_completion(&host->op_completion);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 221a76a..9343cbb 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -405,7 +405,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);

/* Do we have a flash based bad block table ? */
- if (chip->bbt_options & NAND_USE_FLASH_BBT)
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
nand_get_device(chip, mtd, FL_WRITING);
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 66f93e2..dfea9fd 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -14,7 +14,7 @@
*
* When nand_scan_bbt is called, then it tries to find the bad block table
* depending on the options in the BBT descriptor(s). If no flash based BBT
- * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
* marked good / bad blocks. This information is used to create a memory BBT.
* Once a new bad block is discovered then the "factory" information is updated
* on the device.
@@ -36,7 +36,7 @@
* The table is marked in the OOB area with an ident pattern and a version
* number which indicates which of both tables is more up to date. If the NAND
* controller needs the complete OOB area for the ECC information then the
- * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
* course): it moves the ident pattern and the version byte into the data area
* and the OOB area will remain untouched.
*
@@ -1083,14 +1083,14 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
bits = bd->options & NAND_BBT_NRBITS_MSK;

BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
- !(this->bbt_options & NAND_USE_FLASH_BBT));
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!bits);

if (bd->options & NAND_BBT_VERSION)
pattern_len++;

if (bd->options & NAND_BBT_NO_OOB) {
- BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT));
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
BUG_ON(bd->offs);
if (bd->options & NAND_BBT_VERSION)
@@ -1357,12 +1357,12 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_td = &bbt_main_descr;
this->bbt_md = &bbt_mirror_descr;
}
- this->bbt_options |= NAND_USE_FLASH_BBT;
+ this->bbt_options |= NAND_BBT_USE_FLASH;
return nand_scan_bbt(mtd, &agand_flashbased);
}

/* Is a flash based bad block table requested ? */
- if (this->bbt_options & NAND_USE_FLASH_BBT) {
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
/* Use the default pattern descriptors */
if (!this->bbt_td) {
if (this->bbt_options & NAND_BBT_NO_OOB) {
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 1856c42..34c03be 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -2275,7 +2275,7 @@ static int __init ns_init_module(void)
case 2:
chip->bbt_options |= NAND_BBT_NO_OOB;
case 1:
- chip->bbt_options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
case 0:
break;
default:
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 1c17f09..a97264e 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -156,7 +156,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)

/* Enable the following for a flash based bad block table */
chip->options = NAND_NO_AUTOINCR;
- chip->bbt_options = NAND_USE_FLASH_BBT;
+ chip->bbt_options = NAND_BBT_USE_FLASH;

/* Scan to find existence of the device */
if (nand_scan(pasemi_nand_mtd, 1)) {
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 370516c..ec28079 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -881,7 +881,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
* let the kernel fish out the BBT from the NAND, and also skip the
* full NAND scan that can take 1/2s or so. Little things... */
if (set->flash_bbt) {
- chip->bbt_options |= NAND_USE_FLASH_BBT;
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->options |= NAND_SKIP_BBTSCAN;
}
}
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 7929514..ff18c08 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -104,7 +104,7 @@ struct nand_bbt_descr {
* Use a flash based bad block table. By default, OOB identifier is saved in
* OOB area. This option is passed to the default bad block table function.
*/
-#define NAND_USE_FLASH_BBT 0x00040000
+#define NAND_BBT_USE_FLASH 0x00040000
/* Do not store flash based bad block table in OOB area; store it in-band */
#define NAND_BBT_NO_OOB 0x00080000

--
1.7.0.4