From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: Hartley Sweeten <hsweeten@visionengravers.com>,
Ryan Mallon <ryan@bluewatersys.com>
Subject: [PATCH 052/104] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning
Date: Thu, 2 Jun 2011 18:51:30 +0400 [thread overview]
Message-ID: <1307026293-8535-18-git-send-email-dbaryshkov@gmail.com> (raw)
In-Reply-To: <1307026293-8535-1-git-send-email-dbaryshkov@gmail.com>
Instead of specifying a callback for dynamic partitioning, use
MTDPART_OFS_RETAIN for reserving a place near the end of flash for
RedBoot.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <ryan@bluewatersys.com>
---
arch/arm/mach-ep93xx/ts72xx.c | 22 ++++------------------
1 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..68e2849 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -116,8 +116,8 @@ static struct mtd_partition ts72xx_nand_parts[] = {
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "Linux",
- .offset = MTDPART_OFS_APPEND,
- .size = 0, /* filled in later */
+ .offset = MTDPART_OFS_RETAIN,
+ .size = TS72XX_REDBOOT_PART_SIZE, /* leave so much for last partition */
}, {
.name = "RedBoot",
.offset = MTDPART_OFS_APPEND,
@@ -126,28 +126,14 @@ static struct mtd_partition ts72xx_nand_parts[] = {
},
};
-static void ts72xx_nand_set_parts(uint64_t size,
- struct platform_nand_chip *chip)
-{
- /* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
- if (size == SZ_32M || size == SZ_128M) {
- /* Set the "Linux" partition size */
- ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
-
- chip->partitions = ts72xx_nand_parts;
- chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
- } else {
- pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
- }
-}
-
static struct platform_nand_data ts72xx_nand_data = {
.chip = {
.nr_chips = 1,
.chip_offset = 0,
.chip_delay = 15,
.part_probe_types = ts72xx_nand_part_probes,
- .set_parts = ts72xx_nand_set_parts,
+ .partitions = ts72xx_nand_parts,
+ .nr_partitions = ARRAY_SIZE(ts72xx_nand_parts),
},
.ctrl = {
.cmd_ctrl = ts72xx_nand_hwcontrol,
--
1.7.4.4
next prev parent reply other threads:[~2011-06-02 14:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-02 14:51 [RFC PATCH 000/104] mtd: cleanup partition parsing interface Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 004/104] mtd: drop physmap_configure Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 005/104] mtd: cafe_nand: drop reference to CONFIG_MTD_CMDLINE_PARTS Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 006/104] mtdpart: default to cmdlinepart, NULL partitions probing Dmitry Eremin-Solenikov
2011-06-06 7:14 ` Artem Bityutskiy
2011-06-02 14:51 ` [PATCH 007/104] mtd: m25p80 don't specify default parsing options Dmitry Eremin-Solenikov
2011-06-06 7:20 ` Artem Bityutskiy
2011-06-02 14:51 ` [PATCH 040/104] mtd: drop mtd_has_cmdlinepart() Dmitry Eremin-Solenikov
2011-06-06 7:23 ` Artem Bityutskiy
2011-06-02 14:51 ` [PATCH 041/104] mtd: prepare to convert of_mtd_parse_partitions to partition parser Dmitry Eremin-Solenikov
2011-06-06 7:57 ` Artem Bityutskiy
2011-06-06 8:15 ` Dmitry Eremin-Solenikov
2011-06-06 8:19 ` Artem Bityutskiy
2011-06-06 10:10 ` Dmitry Eremin-Solenikov
2011-06-06 8:05 ` Artem Bityutskiy
2011-06-06 9:21 ` Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 042/104] mtd: m25p80: use ofpart through generic parsing Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 043/104] mtd: physmap_of: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 044/104] mtd: fsl_elbc_nand: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 045/104] mtd: fsl_upm: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 046/104] mtd: mpc5121_nfc: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 047/104] mtd: ndfc: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 048/104] mtd: socrates_nand: " Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 049/104] mtd: drop of_mtd_parse_partitions() Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 050/104] physmap_of: separate parse_obsolete_partitions to separate parser Dmitry Eremin-Solenikov
2011-06-06 8:02 ` Artem Bityutskiy
2011-06-06 8:09 ` Dmitry Eremin-Solenikov
2011-06-06 8:11 ` Artem Bityutskiy
2011-06-06 8:13 ` Artem Bityutskiy
2011-06-06 8:24 ` Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 051/104] mtd: add a flags for partitions which should just leave smth. after them Dmitry Eremin-Solenikov
2011-06-02 14:51 ` Dmitry Eremin-Solenikov [this message]
2011-06-02 14:51 ` [PATCH 053/104] mtd: plat-nand: drop unused fields from platform_nand_data Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 054/104] mtd: add new API for handling MTD registration Dmitry Eremin-Solenikov
2011-06-02 14:51 ` [PATCH 055/104] mtd: lart.c: use mtd_device_parse_register Dmitry Eremin-Solenikov
2011-06-03 15:55 ` [RFC PATCH 000/104] mtd: cleanup partition parsing interface Artem Bityutskiy
2011-06-04 8:25 ` Dmitry Eremin-Solenikov
2011-06-06 7:04 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1307026293-8535-18-git-send-email-dbaryshkov@gmail.com \
--to=dbaryshkov@gmail.com \
--cc=hsweeten@visionengravers.com \
--cc=linux-mtd@lists.infradead.org \
--cc=ryan@bluewatersys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox