From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Huang Shijie <b32955@freescale.com>,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Wolfram Sang <w.sang@pengutronix.de>,
Artem Bityutskiy <dedekind1@gmail.com>
Subject: [PATCH v4 08/10] mtd: gpmi-nand: utilize oob_requested parameter
Date: Wed, 2 May 2012 10:15:02 -0700 [thread overview]
Message-ID: <1335978904-8005-9-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1335978904-8005-1-git-send-email-computersforpeace@gmail.com>
Don't read OOB if the caller didn't request it.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 35 +++++++++++++++++--------------
1 files changed, 19 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index ec16f2e..805bcf3 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -907,22 +907,25 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
mtd->ecc_stats.corrected += corrected;
}
- /*
- * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
- * details about our policy for delivering the OOB.
- *
- * We fill the caller's buffer with set bits, and then copy the block
- * mark to th caller's buffer. Note that, if block mark swapping was
- * necessary, it has already been done, so we can rely on the first
- * byte of the auxiliary buffer to contain the block mark.
- */
- memset(chip->oob_poi, ~0, mtd->oobsize);
- chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+ if (oob_required) {
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+ * for details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the
+ * block mark to th caller's buffer. Note that, if block mark
+ * swapping was necessary, it has already been done, so we can
+ * rely on the first byte of the auxiliary buffer to contain
+ * the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
exit_nfc:
return ret;
}
--
1.7.5.4.2.g519b1
next prev parent reply other threads:[~2012-05-02 17:16 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-02 17:14 [PATCH v4 00/10] mtd: nand: rework nand_ecc_ctrl interface for OOB Brian Norris
2012-05-02 17:14 ` [PATCH v4 01/10] mtd: nand: add 'oob_required' argument to NAND {read, write}_page interfaces Brian Norris
2012-05-03 17:16 ` Mike Dunn
2012-05-03 17:43 ` Shmulik Ladkani
2012-05-03 22:34 ` Brian Norris
2012-05-04 7:58 ` Artem Bityutskiy
2012-05-02 17:14 ` [PATCH v4 02/10] mtd: nand: pass proper 'oob_required' parameter Brian Norris
2012-05-02 17:14 ` [PATCH v4 03/10] mtd: Blackfin NFC: utilize oob_required parameter Brian Norris
2012-05-03 9:55 ` Artem Bityutskiy
2012-05-02 17:14 ` [PATCH v4 04/10] mtd: cafe_nand: " Brian Norris
2012-05-02 17:14 ` [PATCH v4 05/10] mtd: denali: " Brian Norris
2012-05-02 17:15 ` [PATCH v4 06/10] mtd: eLBC NAND: " Brian Norris
2012-05-02 17:15 ` [PATCH v4 07/10] mtd: IFC " Brian Norris
2012-05-02 17:15 ` Brian Norris [this message]
2012-05-02 17:15 ` [PATCH v4 09/10] mtd: nand: " Brian Norris
2012-05-02 17:15 ` [PATCH v4 10/10] mtd: pxa3xx_nand: " Brian Norris
2012-05-03 10:00 ` [PATCH v4 00/10] mtd: nand: rework nand_ecc_ctrl interface for OOB Artem Bityutskiy
2012-05-03 17:11 ` Mike Dunn
2012-05-04 7:23 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335978904-8005-9-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=b32955@freescale.com \
--cc=dedekind1@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).