From: Mrugesh Katepallewar <mrugesh.mk@ti.com>
To: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<davinci-linux-open-source@linux.davincidsp.com>
Cc: artem.bityutskiy@linux.intel.com, m-karicheri2@ti.com,
dwmw2@infradead.org, nsekhar@ti.com, mturquette@linaro.org
Subject: [PATCH] mtd: davinci_nand: Use managed resources
Date: Thu, 7 Feb 2013 16:03:15 +0530 [thread overview]
Message-ID: <1360233195-8575-1-git-send-email-mrugesh.mk@ti.com> (raw)
davinci_nand driver currently uses normal kzalloc, ioremap and get_clk
routines. This patch replaces these routines with devm_kzalloc,
devm_request_and_ioremap and devm_clk_get resp.
Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com>
---
Apply on top of v3.8-rc6 of linus tree.
:100644 100644 3502606... e7d5bd6... M drivers/mtd/nand/davinci_nand.c
drivers/mtd/nand/davinci_nand.c | 24 +++++-------------------
1 file changed, 5 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 3502606..e7d5bd6 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -606,7 +606,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
if (pdev->id < 0 || pdev->id > 3)
return -ENODEV;
- info = kzalloc(sizeof(*info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info) {
dev_err(&pdev->dev, "unable to allocate memory\n");
ret = -ENOMEM;
@@ -623,11 +623,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
goto err_nomem;
}
- vaddr = ioremap(res1->start, resource_size(res1));
- base = ioremap(res2->start, resource_size(res2));
+ vaddr = devm_request_and_ioremap(&pdev->dev, res1);
+ base = devm_request_and_ioremap(&pdev->dev, res2);
if (!vaddr || !base) {
dev_err(&pdev->dev, "ioremap failed\n");
- ret = -EINVAL;
+ ret = -EADDRNOTAVAIL;
goto err_ioremap;
}
@@ -717,7 +717,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
}
info->chip.ecc.mode = ecc_mode;
- info->clk = clk_get(&pdev->dev, "aemif");
+ info->clk = devm_clk_get(&pdev->dev, "aemif");
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
@@ -845,8 +845,6 @@ err_timing:
clk_disable_unprepare(info->clk);
err_clk_enable:
- clk_put(info->clk);
-
spin_lock_irq(&davinci_nand_lock);
if (ecc_mode == NAND_ECC_HW_SYNDROME)
ecc4_busy = false;
@@ -855,13 +853,7 @@ err_clk_enable:
err_ecc:
err_clk:
err_ioremap:
- if (base)
- iounmap(base);
- if (vaddr)
- iounmap(vaddr);
-
err_nomem:
- kfree(info);
return ret;
}
@@ -874,15 +866,9 @@ static int __exit nand_davinci_remove(struct platform_device *pdev)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
- iounmap(info->base);
- iounmap(info->vaddr);
-
nand_release(&info->mtd);
clk_disable_unprepare(info->clk);
- clk_put(info->clk);
-
- kfree(info);
return 0;
}
--
1.7.9.5
next reply other threads:[~2013-02-07 10:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 10:33 Mrugesh Katepallewar [this message]
2013-02-13 13:13 ` [PATCH] mtd: davinci_nand: Use managed resources Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360233195-8575-1-git-send-email-mrugesh.mk@ti.com \
--to=mrugesh.mk@ti.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=m-karicheri2@ti.com \
--cc=mturquette@linaro.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox