From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mx7.port.ru ([194.67.57.17]) by pentafluge.infradead.org with esmtp (Exim 3.22 #1 (Red Hat Linux)) id 15RuLj-0006Vu-00 for ; Wed, 01 Aug 2001 12:39:39 +0100 Received: from [195.161.198.29] (helo=195.161.198.29) by mx7.port.ru with esmtp (Exim 3.14 #1) id 15RuRK-0006uT-00 for linux-mtd@lists.infradead.org; Wed, 01 Aug 2001 15:45:26 +0400 Date: Wed, 1 Aug 2001 16:46:05 +0400 From: ASA Reply-To: ASA Message-ID: <13728558576.20010801164605@mail.ru> To: linux-mtd@lists.infradead.org Subject: re: got stuck with DoC 2000: excuse me Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-mtd-admin@lists.infradead.org Errors-To: linux-mtd-admin@lists.infradead.org List-Help: List-Post: List-Subscribe: , List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: Hello all, Excuse me for hurrying and asking before thoroughly examining... > Where I was wrong? Is there any detailed step-by-step instruction to > set up DoC2000? mtd-jffs-HOWTO. at first looking I did not saw this file at all :-( It says what I want... And that 2.2.x does not work with DoC... > I can use 2.4 kernel but I don't want this - I'm developing embedded > device and do not want to enlarge system even by 150-200K. In fact, > I cannot fit kernel 2.4 (even packed with UPX) and initrd with glibc > 2.1 together on single bootable standard-formatted floppy. No, 2.4.1 kernel was enlarged by 20 kbytes only and it does work with DoC. Thank you -- Best regards, ASA mailto:atris@mail.ru