Re: [PATCH v2] ubi: gluebi: Fix NULL pointer dereference caused by ftl notifier

[Richard Weinberger <richard@nod.at>]

----- Ursprüngliche Mail -----
> Von: "ZhaoLong Wang" <wangzhaolong1@huawei.com>
> An: "richard" <richard@nod.at>, "Miquel Raynal" <miquel.raynal@bootlin.com>, "Vignesh Raghavendra" <vigneshr@ti.com>,
> dpervushin@embeddedalley.com, "Artem Bityutskiy" <Artem.Bityutskiy@nokia.com>
> CC: "linux-mtd" <linux-mtd@lists.infradead.org>, "linux-kernel" <linux-kernel@vger.kernel.org>, "chengzhihao1"
> <chengzhihao1@huawei.com>, "ZhaoLong Wang" <wangzhaolong1@huawei.com>, "yi zhang" <yi.zhang@huawei.com>, "yangerkun"
> <yangerkun@huawei.com>
> Gesendet: Mittwoch, 18. Oktober 2023 14:16:18
> Betreff: [PATCH v2] ubi: gluebi: Fix NULL pointer dereference caused by ftl notifier

> If both flt.ko and gluebi.ko are loaded, the notiier of ftl
> triggers NULL pointer dereference when trying to access
> ‘gluebi->desc’ in gluebi_read().
> 
> ubi_gluebi_init
>  ubi_register_volume_notifier
>    ubi_enumerate_volumes
>      ubi_notify_all
>        gluebi_notify    nb->notifier_call()
>          gluebi_create
>            mtd_device_register
>              mtd_device_parse_register
>                add_mtd_device
>                  blktrans_notify_add   not->add()
>                    ftl_add_mtd         tr->add_mtd()
>                      scan_header
>                        mtd_read
>                          mtd_read
>                            mtd_read_oob
>                              gluebi_read   mtd->read()
>                                gluebi->desc - NULL
> 
> Detailed reproduction information available at the link[1],
> 
> In the normal case, obtain gluebi->desc in the gluebi_get_device(),
> and accesses gluebi->desc in the gluebi_read(). However,
> gluebi_get_device() is not executed in advance in the
> ftl_add_mtd() process, which leads to NULL pointer dereference.
> 
> The value of gluebi->desc may also be a negative error code, which
> triggers the page fault error.
> 
> This patch has the following modifications:
> 
> 1. Do not assign gluebi->desc to the error code. Use the NULL instead.
> 
> 2. Always check the validity of gluebi->desc in gluebi_read() If the
>   gluebi->desc is NULL, try to get MTD device.
> 
> Such a modification currently works because the mutex "mtd_table_mutex"
> is held on all necessary paths, including the ftl_add_mtd() call path,
> open and close paths. Therefore, many race condition can be avoided.

I see the problem, but I'm not really satisfied by the solution.
Adding this hack to gluebi_read() is not nice at all.

Is there a strong reason why have to defer ubi_open_volume() to
gluebi_get_device()?

Miquel, what do you think?

Thanks,
//richard

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/