public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Huang Shijie <b32955@freescale.com>
To: <dwmw2@infradead.org>
Cc: Huang Shijie <b32955@freescale.com>,
	computersforpeace@gmail.com, linux-mtd@lists.infradead.org,
	dedekind1@gmail.com
Subject: [PATCH 8/8] mtd: gpmi: change pr_debug to dev_dbg
Date: Thu, 14 Nov 2013 14:25:51 +0800	[thread overview]
Message-ID: <1384410351-2169-9-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1384410351-2169-1-git-send-email-b32955@freescale.com>

Change all the pr_debug to dev_dbg.
Remove the pr_fmt too, since we do not need it.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 85d2be2..4b8df4a 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -18,9 +18,6 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -885,7 +882,7 @@ static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
 	struct nand_chip *chip = mtd->priv;
 	struct gpmi_nand_data *this = chip->priv;
 
-	pr_debug("len is %d\n", len);
+	dev_dbg(this->dev, "len is %d\n", len);
 	this->upper_buf	= buf;
 	this->upper_len	= len;
 
@@ -897,7 +894,7 @@ static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
 	struct nand_chip *chip = mtd->priv;
 	struct gpmi_nand_data *this = chip->priv;
 
-	pr_debug("len is %d\n", len);
+	dev_dbg(this->dev, "len is %d\n", len);
 	this->upper_buf	= (uint8_t *)buf;
 	this->upper_len	= len;
 
@@ -976,7 +973,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	unsigned int  max_bitflips = 0;
 	int           ret;
 
-	pr_debug("page number is : %d\n", page);
+	dev_dbg(this->dev, "page number is : %d\n", page);
 	ret = read_page_prepare(this, buf, mtd->writesize,
 					this->payload_virt, this->payload_phys,
 					nfc_geo->payload_size,
@@ -1052,7 +1049,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	dma_addr_t auxiliary_phys;
 	int        ret;
 
-	pr_debug("ecc write page.\n");
+	dev_dbg(this->dev, "ecc write page.\n");
 	if (this->swap_block_mark) {
 		/*
 		 * If control arrives here, we're doing block mark swapping.
@@ -1190,7 +1187,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 {
 	struct gpmi_nand_data *this = chip->priv;
 
-	pr_debug("page number is %d\n", page);
+	dev_dbg(this->dev, "page number is %d\n", page);
 	/* clear the OOB buffer */
 	memset(chip->oob_poi, ~0, mtd->oobsize);
 
-- 
1.7.2.rc3

  parent reply	other threads:[~2013-11-14  6:48 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-14  6:25 [PATCH 0/8] the clean-up for gpmi Huang Shijie
2013-11-14  6:25 ` [PATCH 1/8] mtd: gpmi: do not use the local array to do the DMA transfer Huang Shijie
2013-11-14 13:46   ` Ezequiel Garcia
2013-11-15  3:53     ` Huang Shijie
2013-11-14 16:23       ` David Woodhouse
2013-11-15  2:14         ` Huang Shijie
2013-11-14  6:25 ` [PATCH 2/8] mtd: gpmi: delete the gpmi_pre_bbt_scan Huang Shijie
2013-11-14  6:25 ` [PATCH 3/8] mtd: gpmi: remove the unused line Huang Shijie
2013-11-14  6:25 ` [PATCH 4/8] mtd: gpmi: rename the functions from gpmi_nfc_* to gpmi_nand_* Huang Shijie
2013-11-14  6:25 ` [PATCH 5/8] mtd: gpmi: use devm_ioremap_resource Huang Shijie
2013-11-14 13:50   ` Ezequiel Garcia
2013-11-15  3:51     ` Huang Shijie
2013-11-14  6:25 ` [PATCH 6/8] mtd: gpmi: use devm_request_irq Huang Shijie
2013-11-14  6:25 ` [PATCH 7/8] mtd: gpmi: change pr_err to dev_err Huang Shijie
2013-11-18 20:23   ` Brian Norris
2013-11-19  2:30     ` Huang Shijie
2013-11-14  6:25 ` Huang Shijie [this message]
2013-11-18 20:24   ` [PATCH 8/8] mtd: gpmi: change pr_debug to dev_dbg Brian Norris
2013-11-18 20:25 ` [PATCH 0/8] the clean-up for gpmi Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384410351-2169-9-git-send-email-b32955@freescale.com \
    --to=b32955@freescale.com \
    --cc=computersforpeace@gmail.com \
    --cc=dedekind1@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox