From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-mtd@lists.infradead.org
Cc: "George Cherian" <george.cherian@ti.com>,
"Brian Norris" <computersforpeace@gmail.com>,
"David Woodhouse" <dwmw2@infradead.org>,
"Akinobu Mita" <akinobu.mita@gmail.com>,
"Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCH v2] mtd: mtd_oobtest: generate consitent data for verification
Date: Thu, 6 Mar 2014 21:37:06 +0900 [thread overview]
Message-ID: <1394109426-8251-1-git-send-email-akinobu.mita@gmail.com> (raw)
mtd_oobtest writes OOB, read it back and verify. The verification is
not correctly done if oobsize is not multiple of 4. Although the data
to be written and the data to be compared are generated by several
prandom_byte_state() calls starting with the same seed, these two are
generated with the different size and different number of calls.
Due to the implementation of prandom_byte_state() if the size on each
call is not multiple of 4, the resulting data is not always same.
This fixes it by just calling prandom_byte_state() once and using
correct range instead of calling it multiple times for each.
Reported-by: George Cherian <george.cherian@ti.com>
Reported-by: Lothar Waßmann <LW@KARO-electronics.de>
Cc: George Cherian <george.cherian@ti.com>
Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
v2: remove a dependency on unsubmitted patch
drivers/mtd/tests/oobtest.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c
index 2e9e2d1..c5ea177 100644
--- a/drivers/mtd/tests/oobtest.c
+++ b/drivers/mtd/tests/oobtest.c
@@ -69,8 +69,8 @@ static int write_eraseblock(int ebnum)
int err = 0;
loff_t addr = ebnum * mtd->erasesize;
+ prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
- prandom_bytes_state(&rnd_state, writebuf, use_len);
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
@@ -78,7 +78,7 @@ static int write_eraseblock(int ebnum)
ops.oobretlen = 0;
ops.ooboffs = use_offset;
ops.datbuf = NULL;
- ops.oobbuf = writebuf;
+ ops.oobbuf = writebuf + use_len_max * i + use_offset;
err = mtd_write_oob(mtd, addr, &ops);
if (err || ops.oobretlen != use_len) {
pr_err("error: writeoob failed at %#llx\n",
@@ -122,8 +122,8 @@ static int verify_eraseblock(int ebnum)
int err = 0;
loff_t addr = ebnum * mtd->erasesize;
+ prandom_bytes_state(&rnd_state, writebuf, use_len_max * pgcnt);
for (i = 0; i < pgcnt; ++i, addr += mtd->writesize) {
- prandom_bytes_state(&rnd_state, writebuf, use_len);
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
@@ -139,7 +139,8 @@ static int verify_eraseblock(int ebnum)
errcnt += 1;
return err ? err : -1;
}
- if (memcmp(readbuf, writebuf, use_len)) {
+ if (memcmp(readbuf, writebuf + use_len_max * i + use_offset,
+ use_len)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -166,7 +167,9 @@ static int verify_eraseblock(int ebnum)
errcnt += 1;
return err ? err : -1;
}
- if (memcmp(readbuf + use_offset, writebuf, use_len)) {
+ if (memcmp(readbuf + use_offset,
+ writebuf + use_len_max * i + use_offset,
+ use_len)) {
pr_err("error: verify failed at %#llx\n",
(long long)addr);
errcnt += 1;
@@ -566,8 +569,8 @@ static int __init mtd_oobtest_init(void)
if (bbt[i] || bbt[i + 1])
continue;
addr = (i + 1) * mtd->erasesize - mtd->writesize;
+ prandom_bytes_state(&rnd_state, writebuf, sz * cnt);
for (pg = 0; pg < cnt; ++pg) {
- prandom_bytes_state(&rnd_state, writebuf, sz);
ops.mode = MTD_OPS_AUTO_OOB;
ops.len = 0;
ops.retlen = 0;
@@ -575,7 +578,7 @@ static int __init mtd_oobtest_init(void)
ops.oobretlen = 0;
ops.ooboffs = 0;
ops.datbuf = NULL;
- ops.oobbuf = writebuf;
+ ops.oobbuf = writebuf + pg * sz;
err = mtd_write_oob(mtd, addr, &ops);
if (err)
goto out;
--
1.8.3.2
next reply other threads:[~2014-03-06 12:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 12:37 Akinobu Mita [this message]
2014-03-07 3:42 ` [PATCH v2] mtd: mtd_oobtest: generate consitent data for verification Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394109426-8251-1-git-send-email-akinobu.mita@gmail.com \
--to=akinobu.mita@gmail.com \
--cc=LW@KARO-electronics.de \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=george.cherian@ti.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox