From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-qc0-x236.google.com ([2607:f8b0:400d:c01::236]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WYghC-0005O2-FN for linux-mtd@lists.infradead.org; Fri, 11 Apr 2014 19:01:02 +0000 Received: by mail-qc0-f182.google.com with SMTP id e16so6419850qcx.13 for ; Fri, 11 Apr 2014 12:00:40 -0700 (PDT) From: Brian Norris To: Subject: [PATCH v3 07/11] mtd: st_spi_fsm: kill duplicate CMD definitions Date: Fri, 11 Apr 2014 12:00:02 -0700 Message-Id: <1397242806-7575-8-git-send-email-computersforpeace@gmail.com> In-Reply-To: <1397242806-7575-1-git-send-email-computersforpeace@gmail.com> References: <1397242806-7575-1-git-send-email-computersforpeace@gmail.com> Cc: Marek Vasut , Huang Shijie , Brian Norris , Lee Jones List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , These are also in serial_flash_cmds.h. (FWIW, I didn't know the C preprocessor allowed redefinitions without warning like this.) Signed-off-by: Brian Norris Acked-by: Lee Jones Reviewed-by: Marek Vasut --- v3: no change drivers/mtd/devices/st_spi_fsm.c | 36 ------------------------------------ 1 file changed, 36 deletions(-) diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 30082a09f68b..122a8a14ef84 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -201,42 +201,6 @@ #define STFSM_MAX_WAIT_SEQ_MS 1000 /* FSM execution time */ -/* Flash Commands */ -#define FLASH_CMD_WREN 0x06 -#define FLASH_CMD_WRDI 0x04 -#define FLASH_CMD_RDID 0x9f -#define FLASH_CMD_RDSR 0x05 -#define FLASH_CMD_RDSR2 0x35 -#define FLASH_CMD_WRSR 0x01 -#define FLASH_CMD_SE_4K 0x20 -#define FLASH_CMD_SE_32K 0x52 -#define FLASH_CMD_SE 0xd8 -#define FLASH_CMD_CHIPERASE 0xc7 - -#define FLASH_CMD_READ 0x03 /* READ */ -#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */ -#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */ -#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */ -#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */ -#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */ - -#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */ -#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */ -#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ -#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ - -#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */ -#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */ - -/* READ commands with 32-bit addressing (N25Q256 and S25FLxxxS) */ -#define FLASH_CMD_READ4 0x13 -#define FLASH_CMD_READ4_FAST 0x0c -#define FLASH_CMD_READ4_1_1_2 0x3c -#define FLASH_CMD_READ4_1_2_2 0xbc -#define FLASH_CMD_READ4_1_1_4 0x6c -#define FLASH_CMD_READ4_1_4_4 0xec - /* S25FLxxxS commands */ #define S25FL_CMD_WRITE4_1_1_4 0x34 #define S25FL_CMD_SE4 0xdc -- 1.8.3.2