From: Lee Jones <lee.jones@linaro.org>
To: linux-kernel@vger.kernel.org
Cc: computersforpeace@gmail.com, linux-mtd@lists.infradead.org,
kernel@stlinux.com
Subject: [PATCH 00/47] mtd: nand: Add new driver supporting ST's BCH h/w
Date: Thu, 1 May 2014 10:56:07 +0100 [thread overview]
Message-ID: <1398938214-17847-1-git-send-email-lee.jones@linaro.org> (raw)
MTD Folks,
This driver is now at v1. Suggestions from the RFC patch-set have now
been applied. None of the framework internals are now exported for use
within the driver, as it now uses the 'ecc' call-backs provided.
Hopefully the driver now conforms to what's expected and will be suitable
to be merged.
NB: This driver is based on a patch written, but not yet submitted by
Brian Norris which renames .erase_cmd() to .erase() and places
responsibility of .waitfunc() functionality into those call-backs.
Kind regards,
Lee
Documentation/devicetree/bindings/mtd/stm-nand.txt | 123 +
arch/arm/boot/dts/stih41x-b2020.dtsi | 39 +
drivers/mtd/nand/Kconfig | 14 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/stm_nand_bch.c | 2437 ++++++++++++++++++++
drivers/mtd/nand/stm_nand_dt.c | 149 ++
drivers/mtd/nand/stm_nand_dt.h | 39 +
drivers/mtd/nand/stm_nand_regs.h | 332 +++
include/linux/mtd/stm_nand.h | 104 +
9 files changed, 3239 insertions(+)
next reply other threads:[~2014-05-01 9:57 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-01 9:56 Lee Jones [this message]
2014-05-01 9:56 ` [PATCH 01/47] ARM: sti: Add BCH (NAND Flash) Controller support for STiH41x (Orly) SoCs Lee Jones
2014-05-01 9:56 ` [PATCH 02/47] mtd: nand: stm_nand_bch: provide Device Tree documentation Lee Jones
2014-05-01 9:56 ` [PATCH 03/47] mtd: nand: add shared register defines for ST's NAND Controller drivers Lee Jones
2014-05-01 9:56 ` [PATCH 04/47] mtd: nand: adding ST's BCH NAND Controller driver Lee Jones
2014-05-01 9:56 ` [PATCH 05/47] mtd: nand: add ONFI NAND Timing Mode Specifications Lee Jones
2014-05-01 9:56 ` [PATCH 06/47] mtd: nand: stm_nand_bch: IRQ support for ST's BCH NAND Controller driver Lee Jones
2014-05-01 9:56 ` [PATCH 07/47] mtd: nand: stm_nand_bch: change between BCH and Hamming modes Lee Jones
2014-05-01 9:56 ` [PATCH 08/47] mtd: nand: stm_nand_bch: initialise the BCH Controller Lee Jones
2014-05-01 9:56 ` [PATCH 09/47] mtd: nand: stm_nand_bch: supply clock support Lee Jones
2014-05-01 9:56 ` [PATCH 10/47] mtd: nand: stm_nand_bch: introduce and initialise some important data structures Lee Jones
2014-05-01 9:56 ` [PATCH 11/47] mtd: nand: stm_nand_bch: initialise the Hamming Controller Lee Jones
2014-05-01 9:56 ` [PATCH 12/47] mtd: nand: stm_nand_bch: add Power Management Lee Jones
2014-05-01 9:56 ` [PATCH 13/47] mtd: nand: stm_nand_bch: scan for NAND devices Lee Jones
2014-05-01 9:56 ` [PATCH 14/47] mtd: nand: stm_nand_bch: provide Device Tree support Lee Jones
2014-05-01 9:56 ` [PATCH 15/47] mtd: nand: stm_nand_bch: configure BCH and FLEX by ONFI timing mode Lee Jones
2014-05-01 9:56 ` [PATCH 16/47] mtd: nand: stm_nand_bch: add compatible page size check Lee Jones
2014-05-01 9:56 ` [PATCH 17/47] mtd: nand: stm_nand_bch: derive some working variables for latter use Lee Jones
2014-05-01 9:56 ` [PATCH 18/47] mtd: nand: stm_nand_bch: automatically set EEC mode if requested Lee Jones
2014-05-01 9:56 ` [PATCH 19/47] mtd: nand: stm_nand_bch: ensure configuration is compatible with this driver Lee Jones
2014-05-01 9:56 ` [PATCH 20/47] mtd: nand: stm_nand_bch: configure BCH read/write/erase programs Lee Jones
2014-05-01 9:56 ` [PATCH 21/47] mtd: nand: stm_nand_bch: initialise working buffers Lee Jones
2014-05-01 9:56 ` [PATCH 22/47] mtd: nand: stm_nand_bch: provide shared BCH operations Lee Jones
2014-05-01 9:56 ` [PATCH 23/47] mtd: nand: stm_nand_bch: erase one block (BCH) Lee Jones
2014-05-01 9:56 ` [PATCH 24/47] mtd: nand: stm_nand_bch: check erased page for zeros Lee Jones
2014-05-01 9:56 ` [PATCH 25/47] mtd: nand: stm_nand_bch: provide read functionality (BCH) Lee Jones
2014-05-01 9:56 ` [PATCH 26/47] mtd: nand: stm_nand_bch: provide write " Lee Jones
2014-05-01 9:56 ` [PATCH 27/47] mtd: nand: stm_nand_bch: find IBBT signature Lee Jones
2014-05-01 9:56 ` [PATCH 28/47] mtd: nand: stm_nand_bch: bad block marking helpers Lee Jones
2014-05-01 9:56 ` [PATCH 29/47] mtd: nand: stm_nand_bch: populate IBBT BCH Header Lee Jones
2014-05-01 9:56 ` [PATCH 30/47] mtd: nand: stm_nand_bch: write IBBT to Flash Lee Jones
2014-05-01 9:56 ` [PATCH 31/47] mtd: nand: stm_nand_bch: update flash-resident BBT(s) Lee Jones
2014-05-01 9:56 ` [PATCH 32/47] mtd: nand: stm_nand_bch: add Hamming-FLEX operations Lee Jones
2014-05-01 9:56 ` [PATCH 33/47] mtd: nand: stm_nand_bch: read and write raw (FLEX) Lee Jones
2014-05-01 9:56 ` [PATCH 34/47] mtd: nand: stm_nand_bch: scan block for BBM(s) according to specified BBT options Lee Jones
2014-05-01 9:56 ` [PATCH 35/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT Lee Jones
2014-05-01 9:56 ` [PATCH 36/47] mtd: nand: stm_nand_bch: search for and load flash-resident BBT Lee Jones
2014-05-01 9:56 ` [PATCH 37/47] mtd: nand: stm_nand_bch: " Lee Jones
2014-05-01 9:56 ` [PATCH 38/47] mtd: nand: stm_nand_bch: dump bad blocks Lee Jones
2014-05-01 9:56 ` [PATCH 39/47] mtd: nand: stm_nand_bch: parse partitions and register an MTD device Lee Jones
2014-05-01 9:56 ` [PATCH 40/47] mtd: nand: stm_nand_bch: fetch the bit-flips threshold Lee Jones
2014-05-01 9:56 ` [PATCH 41/47] mtd: nand: stm_nand_bch: MTD erase (BCH) Lee Jones
2014-05-01 9:56 ` [PATCH 42/47] mtd: nand: stm_nand_bch: MTD mark and check for bad blocks (BCH) Lee Jones
2014-05-01 9:56 ` [PATCH 43/47] mtd: nand: stm_nand_bch: read and write buffers (FLEX) Lee Jones
2014-05-01 9:56 ` [PATCH 44/47] mtd: nand: mtd_nand_bch: add remaining FLEX functions Lee Jones
2014-05-01 9:56 ` [PATCH 45/47] mtd: nand: stm_nand_bch: catch unhandled calls to read and write to the OOB Lee Jones
2014-05-01 9:56 ` [PATCH 46/47] mtd: nand: stm_nand_bch: finalise setup by calling and_scan_tail() Lee Jones
2014-05-01 9:56 ` [PATCH 47/47] mtd: nand: catch unsupported framework call-backs Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398938214-17847-1-git-send-email-lee.jones@linaro.org \
--to=lee.jones@linaro.org \
--cc=computersforpeace@gmail.com \
--cc=kernel@stlinux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox