linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Marek Vasut <marex@denx.de>, Huang Shijie <b32955@freescale.com>,
	Brian Norris <computersforpeace@gmail.com>,
	zajec5@gmail.com
Subject: [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions
Date: Wed,  6 Aug 2014 18:16:57 -0700	[thread overview]
Message-ID: <1407374222-8448-4-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1407374222-8448-1-git-send-email-computersforpeace@gmail.com>

We shouldn't have *every* function checking if a previous write is
complete; this should be done synchronously after each write/erase.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/mtd/spi-nor/spi-nor.c | 36 +++++++++---------------------------
 1 file changed, 9 insertions(+), 27 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index d77c93232b76..227e2743203e 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -229,15 +229,8 @@ static int wait_till_ready(struct spi_nor *nor)
  */
 static int erase_chip(struct spi_nor *nor)
 {
-	int ret;
-
 	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
 
-	/* Wait until finished previous write command. */
-	ret = wait_till_ready(nor);
-	if (ret)
-		return ret;
-
 	/* Send write enable, then erase commands. */
 	write_enable(nor);
 
@@ -300,6 +293,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 			goto erase_err;
 		}
 
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto erase_err;
+
 	/* REVISIT in some cases we could speed up erasing large regions
 	 * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K.  We may have set up
 	 * to use "small sector erase", but that's not always optimal.
@@ -315,6 +312,10 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 
 			addr += mtd->erasesize;
 			len -= mtd->erasesize;
+
+			ret = spi_nor_wait_till_ready(nor);
+			if (ret)
+				goto erase_err;
 		}
 	}
 
@@ -342,11 +343,6 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ret)
 		return ret;
 
-	/* Wait until finished previous command */
-	ret = wait_till_ready(nor);
-	if (ret)
-		goto err;
-
 	status_old = read_sr(nor);
 
 	if (offset < mtd->size - (mtd->size / 2))
@@ -389,11 +385,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	if (ret)
 		return ret;
 
-	/* Wait until finished previous command */
-	ret = wait_till_ready(nor);
-	if (ret)
-		goto err;
-
 	status_old = read_sr(nor);
 
 	if (offset+len > mtd->size - (mtd->size / 64))
@@ -710,11 +701,6 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if (ret)
 		return ret;
 
-	/* Wait until finished previous write command. */
-	ret = wait_till_ready(nor);
-	if (ret)
-		goto time_out;
-
 	write_enable(nor);
 
 	nor->sst_write_second = false;
@@ -786,11 +772,6 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if (ret)
 		return ret;
 
-	/* Wait until finished previous write command. */
-	ret = wait_till_ready(nor);
-	if (ret)
-		goto write_err;
-
 	write_enable(nor);
 
 	page_offset = to & (nor->page_size - 1);
@@ -819,6 +800,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 		}
 	}
 
+	ret = spi_nor_wait_till_ready(nor);
 write_err:
 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
 	return ret;
-- 
1.9.1

  parent reply	other threads:[~2014-08-07  1:21 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-07  1:16 [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
2014-08-07  1:16 ` [PATCH 1/8] mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code Brian Norris
2014-08-07 14:23   ` Marek Vasut
2014-08-09  6:25   ` Huang Shijie
2014-08-11 17:59     ` Brian Norris
2014-09-10  7:26   ` [PATCH v2 1/10] " Brian Norris
2014-08-07  1:16 ` [PATCH 2/8] mtd: spi-nor: handle timeout errors in spi_nor_write() Brian Norris
2014-08-07 14:23   ` Marek Vasut
2014-08-09  7:37   ` Huang Shijie
2014-08-07  1:16 ` Brian Norris [this message]
2014-08-07 14:24   ` [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions Marek Vasut
2014-08-09  8:42   ` Huang Shijie
2014-08-11 18:23     ` Brian Norris
2014-08-12  1:37       ` Huang Shijie
2014-08-07  1:16 ` [PATCH 4/8] mtd: m25p80: drop wait-till-ready checks Brian Norris
2014-08-07 14:24   ` Marek Vasut
2014-08-07  1:16 ` [PATCH 5/8] mtd: fsl-quadspi: " Brian Norris
2014-08-07 14:24   ` Marek Vasut
2014-08-07  1:17 ` [PATCH 6/8] mtd: spi-nor: drop replaceable wait-till-ready function pointer Brian Norris
2014-08-07 14:25   ` Marek Vasut
2014-08-09  9:53   ` Huang Shijie
2014-08-11 18:43     ` Brian Norris
2014-08-12  1:16       ` Huang Shijie
2014-09-10  7:02         ` Brian Norris
2014-08-12  5:13   ` Rafał Miłecki
2014-08-12  5:14     ` Rafał Miłecki
2014-08-07  1:17 ` [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands Brian Norris
2014-08-07 14:25   ` Marek Vasut
2014-08-09 10:52   ` Huang Shijie
2014-08-11 18:48     ` Brian Norris
2014-08-12  0:59       ` Huang Shijie
2014-09-10  7:05         ` Brian Norris
2014-09-10 15:20           ` Huang Shijie
2014-09-10  7:47             ` Brian Norris
2014-09-10 16:12               ` Huang Shijie
2014-09-10 23:25                 ` Brian Norris
2014-11-05 10:29   ` [PATCH v2] " Brian Norris
2014-11-06  3:39     ` Huang Shijie
2014-12-01  8:19     ` Brian Norris
2014-08-07  1:17 ` [RFC 8/8] debug: mtd: spi-nor: add BUG_ON() prints to check for !ready Brian Norris
2014-08-07 14:26   ` Marek Vasut
2014-11-05 10:10 ` [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407374222-8448-4-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=b32955@freescale.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marex@denx.de \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).