linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Marek Vasut <marex@denx.de>, Huang Shijie <b32955@freescale.com>,
	Brian Norris <computersforpeace@gmail.com>,
	zajec5@gmail.com
Subject: [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands
Date: Wed,  6 Aug 2014 18:17:01 -0700	[thread overview]
Message-ID: <1407374222-8448-8-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1407374222-8448-1-git-send-email-computersforpeace@gmail.com>

write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c.
But this should be handled within the spi-nor abstraction layer.

At the same time, let's add write_disable() after erasing, so we don't
leave the flash in a write-enabled state afterward.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 drivers/mtd/devices/m25p80.c      | 5 -----
 drivers/mtd/spi-nor/fsl-quadspi.c | 5 -----
 drivers/mtd/spi-nor/spi-nor.c     | 7 ++++---
 3 files changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 96226ea69f90..116d979ffdb9 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -158,11 +158,6 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
 	dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
 		flash->mtd.erasesize / 1024, (u32)offset);
 
-	/* Send write enable, then erase commands. */
-	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
-	if (ret)
-		return ret;
-
 	/* Set up command buffer. */
 	flash->command[0] = nor->erase_opcode;
 	m25p_addr2cmd(nor, offset, flash->command);
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 9c13622a0c7a..07fbfb0a7738 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -738,11 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
 	dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
 		nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
 
-	/* Send write enable, then erase commands. */
-	ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
-	if (ret)
-		return ret;
-
 	ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
 	if (ret)
 		return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 874e6d9a0b02..d08d9f8bb9bd 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -226,9 +226,6 @@ static int erase_chip(struct spi_nor *nor)
 {
 	dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
 
-	/* Send write enable, then erase commands. */
-	write_enable(nor);
-
 	return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
 }
 
@@ -281,6 +278,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 	if (ret)
 		return ret;
 
+	write_enable(nor);
+
 	/* whole-chip erase? */
 	if (len == mtd->size) {
 		if (erase_chip(nor)) {
@@ -314,6 +313,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
 		}
 	}
 
+	write_disable(nor);
+
 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
 
 	instr->state = MTD_ERASE_DONE;
-- 
1.9.1

  parent reply	other threads:[~2014-08-07  1:21 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-07  1:16 [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
2014-08-07  1:16 ` [PATCH 1/8] mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code Brian Norris
2014-08-07 14:23   ` Marek Vasut
2014-08-09  6:25   ` Huang Shijie
2014-08-11 17:59     ` Brian Norris
2014-09-10  7:26   ` [PATCH v2 1/10] " Brian Norris
2014-08-07  1:16 ` [PATCH 2/8] mtd: spi-nor: handle timeout errors in spi_nor_write() Brian Norris
2014-08-07 14:23   ` Marek Vasut
2014-08-09  7:37   ` Huang Shijie
2014-08-07  1:16 ` [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions Brian Norris
2014-08-07 14:24   ` Marek Vasut
2014-08-09  8:42   ` Huang Shijie
2014-08-11 18:23     ` Brian Norris
2014-08-12  1:37       ` Huang Shijie
2014-08-07  1:16 ` [PATCH 4/8] mtd: m25p80: drop wait-till-ready checks Brian Norris
2014-08-07 14:24   ` Marek Vasut
2014-08-07  1:16 ` [PATCH 5/8] mtd: fsl-quadspi: " Brian Norris
2014-08-07 14:24   ` Marek Vasut
2014-08-07  1:17 ` [PATCH 6/8] mtd: spi-nor: drop replaceable wait-till-ready function pointer Brian Norris
2014-08-07 14:25   ` Marek Vasut
2014-08-09  9:53   ` Huang Shijie
2014-08-11 18:43     ` Brian Norris
2014-08-12  1:16       ` Huang Shijie
2014-09-10  7:02         ` Brian Norris
2014-08-12  5:13   ` Rafał Miłecki
2014-08-12  5:14     ` Rafał Miłecki
2014-08-07  1:17 ` Brian Norris [this message]
2014-08-07 14:25   ` [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands Marek Vasut
2014-08-09 10:52   ` Huang Shijie
2014-08-11 18:48     ` Brian Norris
2014-08-12  0:59       ` Huang Shijie
2014-09-10  7:05         ` Brian Norris
2014-09-10 15:20           ` Huang Shijie
2014-09-10  7:47             ` Brian Norris
2014-09-10 16:12               ` Huang Shijie
2014-09-10 23:25                 ` Brian Norris
2014-11-05 10:29   ` [PATCH v2] " Brian Norris
2014-11-06  3:39     ` Huang Shijie
2014-12-01  8:19     ` Brian Norris
2014-08-07  1:17 ` [RFC 8/8] debug: mtd: spi-nor: add BUG_ON() prints to check for !ready Brian Norris
2014-08-07 14:26   ` Marek Vasut
2014-11-05 10:10 ` [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407374222-8448-8-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=b32955@freescale.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marex@denx.de \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).