From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Marek Vasut <marex@denx.de>,
Brian Norris <computersforpeace@gmail.com>,
Huang Shijie <shijie8@gmail.com>
Subject: [PATCH v2] mtd: spi-nor: factor out write_enable() for erase commands
Date: Wed, 5 Nov 2014 02:29:03 -0800 [thread overview]
Message-ID: <1415183343-11891-1-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1407374222-8448-8-git-send-email-computersforpeace@gmail.com>
write_enable() was being duplicated to both m25p80.c and fsl-quadspi.c.
But this should be handled within the spi-nor abstraction layer.
At the same time, let's add write_disable() after erasing, so we don't
leave the flash in a write-enabled state afterward.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/devices/m25p80.c | 6 ------
drivers/mtd/spi-nor/fsl-quadspi.c | 5 -----
drivers/mtd/spi-nor/spi-nor.c | 9 ++++++---
3 files changed, 6 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35e7e9896b17..3bd12bbb94eb 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -157,16 +157,10 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
static int m25p80_erase(struct spi_nor *nor, loff_t offset)
{
struct m25p *flash = nor->priv;
- int ret;
dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
flash->mtd.erasesize / 1024, (u32)offset);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
/* Set up command buffer. */
flash->command[0] = nor->erase_opcode;
m25p_addr2cmd(nor, offset, flash->command);
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 03dcffac8185..7f2ba8d946b5 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -738,11 +738,6 @@ static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)
dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
nor->mtd->erasesize / 1024, q->chip_base_addr, (u32)offs);
- /* Send write enable, then erase commands. */
- ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
- if (ret)
- return ret;
-
ret = fsl_qspi_runcmd(q, nor->erase_opcode, offs, 0);
if (ret)
return ret;
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index bfb67f1e2b7d..5e3a1d363895 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -228,9 +228,6 @@ static int erase_chip(struct spi_nor *nor)
{
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd->size >> 10));
- /* Send write enable, then erase commands. */
- write_enable(nor);
-
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0, 0);
}
@@ -285,6 +282,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* whole-chip erase? */
if (len == mtd->size) {
+ write_enable(nor);
+
if (erase_chip(nor)) {
ret = -EIO;
goto erase_err;
@@ -302,6 +301,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
/* "sector"-at-a-time erase */
} else {
while (len) {
+ write_enable(nor);
+
if (nor->erase(nor, addr)) {
ret = -EIO;
goto erase_err;
@@ -316,6 +317,8 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
}
}
+ write_disable(nor);
+
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
instr->state = MTD_ERASE_DONE;
--
1.9.1
next prev parent reply other threads:[~2014-11-05 10:29 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-07 1:16 [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
2014-08-07 1:16 ` [PATCH 1/8] mtd: spi-nor: eliminate duplicate spi_nor_wait_till_{, fsr}_ready() code Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 6:25 ` Huang Shijie
2014-08-11 17:59 ` Brian Norris
2014-09-10 7:26 ` [PATCH v2 1/10] " Brian Norris
2014-08-07 1:16 ` [PATCH 2/8] mtd: spi-nor: handle timeout errors in spi_nor_write() Brian Norris
2014-08-07 14:23 ` Marek Vasut
2014-08-09 7:37 ` Huang Shijie
2014-08-07 1:16 ` [PATCH 3/8] mtd: spi-nor: move "wait-till-ready" checks into erase/write functions Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-09 8:42 ` Huang Shijie
2014-08-11 18:23 ` Brian Norris
2014-08-12 1:37 ` Huang Shijie
2014-08-07 1:16 ` [PATCH 4/8] mtd: m25p80: drop wait-till-ready checks Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:16 ` [PATCH 5/8] mtd: fsl-quadspi: " Brian Norris
2014-08-07 14:24 ` Marek Vasut
2014-08-07 1:17 ` [PATCH 6/8] mtd: spi-nor: drop replaceable wait-till-ready function pointer Brian Norris
2014-08-07 14:25 ` Marek Vasut
2014-08-09 9:53 ` Huang Shijie
2014-08-11 18:43 ` Brian Norris
2014-08-12 1:16 ` Huang Shijie
2014-09-10 7:02 ` Brian Norris
2014-08-12 5:13 ` Rafał Miłecki
2014-08-12 5:14 ` Rafał Miłecki
2014-08-07 1:17 ` [PATCH 7/8] mtd: spi-nor: factor out write_enable() for erase commands Brian Norris
2014-08-07 14:25 ` Marek Vasut
2014-08-09 10:52 ` Huang Shijie
2014-08-11 18:48 ` Brian Norris
2014-08-12 0:59 ` Huang Shijie
2014-09-10 7:05 ` Brian Norris
2014-09-10 15:20 ` Huang Shijie
2014-09-10 7:47 ` Brian Norris
2014-09-10 16:12 ` Huang Shijie
2014-09-10 23:25 ` Brian Norris
2014-11-05 10:29 ` Brian Norris [this message]
2014-11-06 3:39 ` [PATCH v2] " Huang Shijie
2014-12-01 8:19 ` Brian Norris
2014-08-07 1:17 ` [RFC 8/8] debug: mtd: spi-nor: add BUG_ON() prints to check for !ready Brian Norris
2014-08-07 14:26 ` Marek Vasut
2014-11-05 10:10 ` [PATCH 0/8] mtd: spi-nor: refactor wait-till-ready Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1415183343-11891-1-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=marex@denx.de \
--cc=shijie8@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).