From: Graham Moore <grmoore@opensource.altera.com>
To: <linux-mtd@lists.infradead.org>
Cc: Alan Tull <atull@opensource.altera.com>,
Yves Vandervennet <yvanderv@opensource.altera.com>,
linux-kernel@vger.kernel.org,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Dinh Nguyen <dinguyen@opensource.altera.com>,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Graham Moore <grmoore@opensource.altera.com>
Subject: [PATCH 1/2] mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver.
Date: Fri, 5 Dec 2014 13:35:32 -0600 [thread overview]
Message-ID: <1417808133-20719-2-git-send-email-grmoore@opensource.altera.com> (raw)
In-Reply-To: <1417808133-20719-1-git-send-email-grmoore@opensource.altera.com>
Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
---
.../devicetree/bindings/mtd/cadence_quadspi.txt | 50 ++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
new file mode 100644
index 0000000..3a8ea1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/cadence_quadspi.txt
@@ -0,0 +1,50 @@
+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+ physical address and length. The first entry is the address and
+ length of the controller register set. The second entry is the
+ address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- ext-decoder : Value of 0 means no external chipselect decoder is
+ connected, 1 means there is an external chipselect decoder connected.
+- fifo-depth : Size of the data FIFO in words.
+- bus-num : Number of the SPI bus to which the controller is connected.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,page-size : Size, in bytes, of the device's write page
+- cdns,block-size : Size of the device's erase block
+- cdns,read-delay : Selay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in master reference clocks for the length that the master mode chip select outputs are de-asserted between transactions.
+- cdns,tsd2d-ns : Delay in master reference clocks between one chip select being de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in master reference clocks between last bit of current transaction and deasserting the device chip select (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in master reference clocks between setting qspi_n_ss_out low and first bit transfer.
+
+Example:
+
+ qspi: spi@ff705000 {
+ compatible = "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xff705000 0x1000>,
+ <0xffa00000 0x1000>;
+ interrupts = <0 151 4>;
+ clocks = <&qspi_clk>;
+ ext-decoder = <0>;
+ fifo-depth = <128>;
+
+ flash0: n25q00@0 {
+ ...
+ cdns,page-size = <256>;
+ cdns,block-size = <16>;
+ cdns,read-delay = <4>;
+ cdns,tshsl-ns = <50>;
+ cdns,tsd2d-ns = <50>;
+ cdns,tchsh-ns = <4>;
+ cdns,tslch-ns = <4>;
+ }
+ }
--
1.7.9.5
next prev parent reply other threads:[~2014-12-05 19:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-05 19:35 [PATCH 0/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller Graham Moore
2014-12-05 19:35 ` Graham Moore [this message]
2014-12-05 19:35 ` [PATCH 2/2] " Graham Moore
2014-12-05 22:30 ` Rafał Miłecki
2014-12-08 16:54 ` Graham Moore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1417808133-20719-2-git-send-email-grmoore@opensource.altera.com \
--to=grmoore@opensource.altera.com \
--cc=atull@opensource.altera.com \
--cc=computersforpeace@gmail.com \
--cc=dinguyen@opensource.altera.com \
--cc=dwmw2@infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=yvanderv@opensource.altera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).