[PATCH v3 1/2] mtd: fsl-quadspi: Call fsl_qspi_set_base_addr after nor_size is set

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@freescale.com>

fsl_qspi_set_base_addr() uses nor_size information, but it is called prior to
the initialization of nor_size.

Fix it by calling fsl_qspi_set_base_addr() after nor_size is configured.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Newly introduced in this version

 drivers/mtd/spi-nor/fsl-quadspi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 39763b9..20cffd2 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -897,9 +897,6 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto map_failed;
 
-		/* set the chip address for READID */
-		fsl_qspi_set_base_addr(q, nor);
-
 		ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
 		if (ret)
 			goto map_failed;
@@ -917,6 +914,9 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 			fsl_qspi_set_map_addr(q);
 		}
 
+		/* set the chip address for READID */
+		fsl_qspi_set_base_addr(q, nor);
+
 		/*
 		 * The TX FIFO is 64 bytes in the Vybrid, but the Page Program
 		 * may writes 265 bytes per time. The write is working in the
-- 
1.9.1