public inbox for linux-mtd@lists.infradead.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: linux-mtd@lists.infradead.org,
	David Woodhouse <David.Woodhouse@intel.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
	Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>,
	Giel van Schijndel <me@mortis.eu>
Subject: [PATCH v2] mtd: nftl: reorganize operations in condition check
Date: Wed,  7 Jan 2015 22:37:20 +0200	[thread overview]
Message-ID: <1420663040-3857-1-git-send-email-andy.shevchenko@gmail.com> (raw)

We need to compare ret variable for negative value. The current code
assigns the boolean to the ret and prints it wrongly in the warning
message.

Reported-by: Andrey Karpov <karpov@viva64.com>
Cc: Giel van Schijndel <me@mortis.eu>
Cc: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/mtd/nftlmount.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nftlmount.c b/drivers/mtd/nftlmount.c
index 51b9d6a..a5dfbfb 100644
--- a/drivers/mtd/nftlmount.c
+++ b/drivers/mtd/nftlmount.c
@@ -89,9 +89,10 @@ static int find_boot_record(struct NFTLrecord *nftl)
 		}
 
 		/* To be safer with BIOS, also use erase mark as discriminant */
-		if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize +
+		ret = nftl_read_oob(mtd, block * nftl->EraseSize +
 					 SECTORSIZE + 8, 8, &retlen,
-					 (char *)&h1) < 0)) {
+					 (char *)&h1);
+		if (ret < 0) {
 			printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
 			continue;
@@ -109,8 +110,9 @@ static int find_boot_record(struct NFTLrecord *nftl)
 		}
 
 		/* Finally reread to check ECC */
-		if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
-				     &retlen, buf) < 0)) {
+		ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
+				&retlen, buf);
+		if (ret < 0) {
 			printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
 			       block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
 			continue;
@@ -228,9 +230,11 @@ device is already correct.
 The new DiskOnChip driver already scanned the bad block table.  Just query it.
 			if ((i & (SECTORSIZE - 1)) == 0) {
 				/* read one sector for every SECTORSIZE of blocks */
-				if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize +
-						     i + SECTORSIZE, SECTORSIZE, &retlen,
-						     buf)) < 0) {
+				ret = mtd->read(nftl->mbd.mtd,
+						block * nftl->EraseSize + i +
+						SECTORSIZE, SECTORSIZE,
+						&retlen, buf);
+				if (ret < 0) {
 					printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
 					       ret);
 					kfree(nftl->ReplUnitTable);
-- 
1.8.3.101.g727a46b

             reply	other threads:[~2015-01-07 20:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-07 20:37 Andy Shevchenko [this message]
2015-01-09 23:29 ` [PATCH v2] mtd: nftl: reorganize operations in condition check Brian Norris
2015-01-10 12:56   ` Andy Shevchenko
2015-01-10 20:11     ` Giel van Schijndel
2015-01-10 23:39       ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1420663040-3857-1-git-send-email-andy.shevchenko@gmail.com \
    --to=andy.shevchenko@gmail.com \
    --cc=David.Woodhouse@intel.com \
    --cc=dimitri.gorokhovik@free.fr \
    --cc=linux-mtd@lists.infradead.org \
    --cc=me@mortis.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox