From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard To: Gregory Clement , Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Ezequiel Garcia , Brian Norris Subject: [PATCH v2 0/2] ARM: mvebu: a385-db-ap: Enable the NAND controller Date: Mon, 26 Jan 2015 15:56:02 +0100 Message-Id: <1422284164-16867-1-git-send-email-maxime.ripard@free-electrons.com> Cc: Lior Amsalem , Tawfik Bayouk , Thomas Petazzoni , Seif Mazareeb , linux-kernel@vger.kernel.org, Sudhakar Gundubogula , Nadav Haklai , Boris Brezillon , linux-mtd@lists.infradead.org, Maxime Ripard , linux-arm-kernel@lists.infradead.org List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi, This patch serie enable the NAND support on the Armada 385 Access Point DB. In the process, some timeouts were found when we were accessing a freshly erased NAND page, which turned out to be an issue when draining the read FIFO where we were not following the datasheet. This has been fixed with the first patch, with stable CC'd. The second patch just enables the NAND controller in the DT. Thanks, Maxime Changes from v1: - Added a timeout to the busy waiting loop for RDDREQ Maxime Ripard (2): mtd: nand: pxa3xx: Fix PIO FIFO draining ARM: mvebu: a385-db-ap: Enable the NAND arch/arm/boot/dts/armada-385-db-ap.dts | 13 ++++++++++ drivers/mtd/nand/pxa3xx_nand.c | 45 +++++++++++++++++++++++++++++----- 2 files changed, 52 insertions(+), 6 deletions(-) -- 2.2.2