linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Han Xu <b45815@freescale.com>
To: <shijie.huang@arm.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
	<b45815@freescale.com>, <boris.brezillon@free-electrons.com>,
	<fabio.estevam@freescale.com>, <hofrat@osadl.org>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<vinod.koul@intel.com>, <dan.j.williams@intel.com>,
	<dmaengine@vger.kernel.org>
Subject: [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume support
Date: Fri, 28 Aug 2015 14:32:40 -0500	[thread overview]
Message-ID: <1440790365-28072-2-git-send-email-b45815@freescale.com> (raw)
In-Reply-To: <1440790365-28072-1-git-send-email-b45815@freescale.com>

From: Huang Shijie <b32955@freescale.com>

i.MX6SX supports deep sleep mode(DSM) that may turn off GPMI/BCH power
during suspend, add gpmi nand suspend/resume function to release DMA
channel in suspend function and re-init GPMI/BCH controller during
resume function.

Although it is not necessary to restore GPMI/BCH registers value for
i.MX6QDL, the code doesn't distinguish different platforms to keep the
code simple.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Han Xu <han.xu@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 45 +++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 1b8f350..dfd0ba1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1,7 +1,7 @@
 /*
  * Freescale GPMI NAND Flash Driver
  *
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -2036,9 +2036,52 @@ static int gpmi_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int gpmi_pm_suspend(struct device *dev)
+{
+	struct gpmi_nand_data *this = dev_get_drvdata(dev);
+
+	release_dma_channels(this);
+	return 0;
+}
+
+static int gpmi_pm_resume(struct device *dev)
+{
+	struct gpmi_nand_data *this = dev_get_drvdata(dev);
+	int ret;
+
+	ret = acquire_dma_channels(this);
+	if (ret < 0)
+		return ret;
+
+	/* re-init the GPMI registers */
+	this->flags &= ~GPMI_TIMING_INIT_OK;
+	ret = gpmi_init(this);
+	if (ret) {
+		dev_err(this->dev, "Error setting GPMI : %d\n", ret);
+		return ret;
+	}
+
+	/* re-init the BCH registers */
+	ret = bch_set_geometry(this);
+	if (ret) {
+		dev_err(this->dev, "Error setting BCH : %d\n", ret);
+		return ret;
+	}
+
+	/* re-init others */
+	gpmi_extra_init(this);
+
+	return 0;
+}
+
+static const struct dev_pm_ops gpmi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
+};
+
 static struct platform_driver gpmi_nand_driver = {
 	.driver = {
 		.name = "gpmi-nand",
+		.pm = &gpmi_pm_ops,
 		.of_match_table = gpmi_nand_id_table,
 	},
 	.probe   = gpmi_nand_probe,
-- 
1.9.1

  reply	other threads:[~2015-08-28 19:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-28 19:32 [PATCH v3 0/6] mtd: nand: gpmi: gpmi-nand DSM and bitflip support Han Xu
2015-08-28 19:32 ` Han Xu [this message]
2015-08-29  9:17   ` [PATCH v3 1/6] mtd: nand: gpmi: add gpmi dsm supend/resume support Nicholas Mc Guire
2015-09-01  8:11     ` Huang Shijie
2015-08-28 19:32 ` [PATCH v3 2/6] dmaengine: mxs: support i.MX7D and deep sleep mode Han Xu
2015-09-21 17:02   ` Vinod Koul
2015-10-20 15:52     ` Han Xu
2015-08-28 19:32 ` [PATCH v3 3/6] mtd: nand: gpmi: may use minimum required ecc for 744 oobsize NAND Han Xu
2015-08-28 19:32 ` [PATCH v3 4/6] mtd: nand: gpmi: add GPMI NAND support for i.MX7D Han Xu
2015-08-29  9:48   ` Nicholas Mc Guire
2015-08-28 19:32 ` [PATCH v3 5/6] mtd: nand: gpmi: correct bitflip for erased NAND page Han Xu
2015-08-28 19:32 ` [PATCH v3 6/6] mtd: nand: gpmi: support NAND on i.MX6UL Han Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1440790365-28072-2-git-send-email-b45815@freescale.com \
    --to=b45815@freescale.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=computersforpeace@gmail.com \
    --cc=dan.j.williams@intel.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=dwmw2@infradead.org \
    --cc=fabio.estevam@freescale.com \
    --cc=hofrat@osadl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=shijie.huang@arm.com \
    --cc=vinod.koul@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).