From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anup Patel To: David Woodhouse , Brian Norris , CC: Rob Herring , Pawel Moll , "Mark Rutland" , Ian Campbell , Kumar Gala , "Catalin Marinas" , Will Deacon , Ray Jui , Scott Branden , Florian Fainelli , Pramod KUMAR , "Vikram Prakash" , Sandeep Tripathy , , , , , "Anup Patel" Subject: [PATCH v2 2/4] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64 Date: Fri, 16 Oct 2015 14:38:55 +0530 Message-ID: <1444986537-28387-3-git-send-email-anup.patel@broadcom.com> In-Reply-To: <1444986537-28387-1-git-send-email-anup.patel@broadcom.com> References: <1444986537-28387-1-git-send-email-anup.patel@broadcom.com> MIME-Version: 1.0 Content-Type: text/plain List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND for ARM64. Signed-off-by: Anup Patel Reviewed-by: Vikram Prakash Reviewed-by: Ray Jui Reviewed-by: Pramod KUMAR Reviewed-by: Scott Branden --- drivers/mtd/nand/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3324281..a1b5819 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND config MTD_NAND_BRCMNAND tristate "Broadcom STB NAND controller" - depends on ARM || MIPS + depends on ARM || ARM64 || MIPS help Enables the Broadcom NAND controller driver. The controller was originally designed for Set-Top Box but is used on various BCM7xxx, -- 1.9.1