From: Han Xu <b45815@freescale.com>
To: <shijie.huang@arm.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<b45815@freescale.com>, <boris.brezillon@free-electrons.com>,
<fabio.estevam@freescale.com>, <hofrat@osadl.org>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<vinod.koul@intel.com>, <dan.j.williams@intel.com>,
<dmaengine@vger.kernel.org>
Subject: [PATCH v5 2/7] dmaengine: mxs: APBH DMA supports deep sleep mode
Date: Wed, 21 Oct 2015 16:41:36 -0500 [thread overview]
Message-ID: <1445463701-5921-3-git-send-email-b45815@freescale.com> (raw)
In-Reply-To: <1445463701-5921-1-git-send-email-b45815@freescale.com>
From: Huang Shijie <b32955@freescale.com>
Deep Sleep Mode(dsm) turns off the power for APBH DMA module, DMA
need to be re-initialized when system resumed back.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Han Xu <b45815@freescale.com>
---
drivers/dma/mxs-dma.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
index 60de352..7e5800a 100644
--- a/drivers/dma/mxs-dma.c
+++ b/drivers/dma/mxs-dma.c
@@ -693,7 +693,7 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan,
return mxs_chan->status;
}
-static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma)
+static int mxs_dma_init(struct mxs_dma_engine *mxs_dma)
{
int ret;
@@ -835,6 +835,7 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
mxs_dma->pdev = pdev;
mxs_dma->dma_device.dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, mxs_dma);
/* mxs_dma gets 65535 bytes maximum sg size */
mxs_dma->dma_device.dev->dma_parms = &mxs_dma->dma_parms;
@@ -872,9 +873,25 @@ static int __init mxs_dma_probe(struct platform_device *pdev)
return 0;
}
+static int mxs_dma_pm_resume(struct device *dev)
+{
+ struct mxs_dma_engine *mxs_dma = dev_get_drvdata(dev);
+ int ret;
+
+ ret = mxs_dma_init(mxs_dma);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+static const struct dev_pm_ops mxs_dma_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, mxs_dma_pm_resume)
+};
+
static struct platform_driver mxs_dma_driver = {
.driver = {
.name = "mxs-dma",
+ .pm = &mxs_dma_pm_ops,
.of_match_table = mxs_dma_dt_ids,
},
.id_table = mxs_dma_ids,
--
1.9.1
next prev parent reply other threads:[~2015-10-21 21:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 21:41 [PATCH v5 0/7] mtd: nand: gpmi: gpmi-nand DSM and bitflip support Han Xu
2015-10-21 21:41 ` [PATCH v5 1/7] mtd: nand: gpmi: add gpmi dsm supend/resume support Han Xu
2015-10-21 21:41 ` Han Xu [this message]
2015-10-21 21:41 ` [PATCH v5 3/7] dmaengine: mxs: add i.MX7D APBH DMA support Han Xu
2015-10-21 21:41 ` [PATCH v5 4/7] mtd: nand: gpmi: may use minimum required ecc for 744 oobsize NAND Han Xu
2015-10-21 21:41 ` [PATCH v5 5/7] mtd: nand: gpmi: add GPMI NAND support for i.MX7D Han Xu
2015-10-22 19:10 ` kbuild test robot
2015-10-21 21:41 ` [PATCH v5 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page Han Xu
2015-10-21 21:41 ` [PATCH v5 7/7] mtd: nand: gpmi: support NAND on i.MX6UL Han Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445463701-5921-3-git-send-email-b45815@freescale.com \
--to=b45815@freescale.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=fabio.estevam@freescale.com \
--cc=hofrat@osadl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=shijie.huang@arm.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).