From: Han Xu <b45815@freescale.com>
To: <shijie.huang@arm.com>
Cc: <dwmw2@infradead.org>, <computersforpeace@gmail.com>,
<b45815@freescale.com>, <boris.brezillon@free-electrons.com>,
<fabio.estevam@freescale.com>, <hofrat@osadl.org>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<vinod.koul@intel.com>, <dan.j.williams@intel.com>,
<dmaengine@vger.kernel.org>
Subject: [PATCH v6 1/7] mtd: nand: gpmi: add gpmi dsm supend/resume support
Date: Thu, 22 Oct 2015 14:54:30 -0500 [thread overview]
Message-ID: <1445543676-19876-2-git-send-email-b45815@freescale.com> (raw)
In-Reply-To: <1445543676-19876-1-git-send-email-b45815@freescale.com>
From: Huang Shijie <b32955@freescale.com>
i.MX6SX supports deep sleep mode(DSM) that may turn off GPMI/BCH power
during suspend, add gpmi nand suspend/resume function to release DMA
channel in suspend function and re-init GPMI/BCH controller during
resume function.
Although it is not necessary to restore GPMI/BCH registers value for
i.MX6QDL, the code doesn't distinguish different platforms to keep the
code simple.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Han Xu <han.xu@freescale.com>
---
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 45 +++++++++++++++++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 2064ada..61a39cb 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -2036,9 +2036,52 @@ static int gpmi_nand_remove(struct platform_device *pdev)
return 0;
}
+static int gpmi_pm_suspend(struct device *dev)
+{
+ struct gpmi_nand_data *this = dev_get_drvdata(dev);
+
+ release_dma_channels(this);
+ return 0;
+}
+
+static int gpmi_pm_resume(struct device *dev)
+{
+ struct gpmi_nand_data *this = dev_get_drvdata(dev);
+ int ret;
+
+ ret = acquire_dma_channels(this);
+ if (ret < 0)
+ return ret;
+
+ /* re-init the GPMI registers */
+ this->flags &= ~GPMI_TIMING_INIT_OK;
+ ret = gpmi_init(this);
+ if (ret) {
+ dev_err(this->dev, "Error setting GPMI : %d\n", ret);
+ return ret;
+ }
+
+ /* re-init the BCH registers */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ dev_err(this->dev, "Error setting BCH : %d\n", ret);
+ return ret;
+ }
+
+ /* re-init others */
+ gpmi_extra_init(this);
+
+ return 0;
+}
+
+static const struct dev_pm_ops gpmi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(gpmi_pm_suspend, gpmi_pm_resume)
+};
+
static struct platform_driver gpmi_nand_driver = {
.driver = {
.name = "gpmi-nand",
+ .pm = &gpmi_pm_ops,
.of_match_table = gpmi_nand_id_table,
},
.probe = gpmi_nand_probe,
--
1.9.1
next prev parent reply other threads:[~2015-10-22 20:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-22 19:54 [PATCH v6 0/7] mtd: nand: gpmi: gpmi-nand DSM and bitflip support Han Xu
2015-10-22 19:54 ` Han Xu [this message]
2015-10-22 19:54 ` [PATCH v6 2/7] dmaengine: mxs: APBH DMA supports deep sleep mode Han Xu
2015-10-27 2:25 ` Vinod Koul
2015-10-29 21:10 ` Andy Shevchenko
2015-10-22 19:54 ` [PATCH v6 3/7] dmaengine: mxs: add i.MX7D APBH DMA support Han Xu
2015-10-22 19:54 ` [PATCH v6 4/7] mtd: nand: gpmi: may use minimum required ecc for 744 oobsize NAND Han Xu
2015-10-22 19:54 ` [PATCH v6 5/7] mtd: nand: gpmi: add GPMI NAND support for i.MX7D Han Xu
2015-10-22 19:54 ` [PATCH v6 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page Han Xu
2015-10-22 19:54 ` [PATCH v6 7/7] mtd: nand: gpmi: support NAND on i.MX6UL Han Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445543676-19876-2-git-send-email-b45815@freescale.com \
--to=b45815@freescale.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=fabio.estevam@freescale.com \
--cc=hofrat@osadl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=shijie.huang@arm.com \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).