[PATCH v1 1/5] mtd: atmel_nand: Do not warn on bitflips

[Romain Izard <romain.izard.pro@gmail.com>]

When using multi-bit ECC, it is normal for the NAND Flash driver to
correct bit errors during the life of the product. Those errors will
only be cleared once a threshold has been reached, and corrections can
occur regularly before this.

Use only dev_dbg and not dev_info to report the bitflips, to keep the
system log clean when everything works correctly.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by:  Wenyou Yang <wenyou.yang@atmel.com>
---
 drivers/mtd/nand/atmel_nand.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 46010bd895b1..9d71f9e6a8de 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -824,7 +824,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			*(buf + byte_pos) ^= (1 << bit_pos);
 
 			pos = sector_num * host->pmecc_sector_size + byte_pos;
-			dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, *(buf + byte_pos));
 		} else {
 			/* Bit flip in OOB area */
@@ -834,7 +834,7 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
 			ecc[tmp] ^= (1 << bit_pos);
 
 			pos = tmp + nand_chip->ecc.layout->eccpos[0];
-			dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+			dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
 				pos, bit_pos, err_byte, ecc[tmp]);
 		}
 
-- 
2.5.0