From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: "Brian Norris" <computersforpeace@gmail.com>,
"Rafał Miłecki" <zajec5@gmail.com>,
"Ezequiel Garcia" <ezequiel@vanguardiasur.com.ar>,
"Boris Brezillon" <boris.brezillon@free-electrons.com>,
linux-kernel@vger.kernel.org,
"Bayi Cheng" <bayi.cheng@mediatek.com>,
"Marek Vasut" <marex@denx.de>,
djkurtz@chromium.org
Subject: [PATCH 8/8] mtd: spi-nor: support lock/unlock for a few Winbond chips
Date: Wed, 27 Jan 2016 21:51:47 -0800 [thread overview]
Message-ID: <1453960307-10181-9-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1453960307-10181-1-git-send-email-computersforpeace@gmail.com>
These are recent Winbond models that are known to have lock/unlock
support via writing the Status Register, and that also support the TB
(Top/Bottom) protection bit.
Tested on w25q32dw.
[Note on style: these entries are getting pretty long lines, so I picked
a style that seems reasonable for splitting up the flags separate from
the other mostly-similar fields.]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/spi-nor/spi-nor.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 5e84e3c543aa..cd3908e26712 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -942,11 +942,23 @@ static const struct flash_info spi_nor_ids[] = {
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
{ "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
{ "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ {
+ "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ {
+ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ {
+ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
--
1.7.9.5
next prev parent reply other threads:[~2016-01-28 5:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 5:51 [PATCH 0/8] mtd: spi-nor: locking fixes and updates Brian Norris
2016-01-28 5:51 ` [PATCH 1/8] mtd: spi-nor: wait for SR_WIP to clear on initial unlock Brian Norris
2016-01-28 5:51 ` [PATCH 2/8] mtd: spi-nor: guard against underflows in stm_is_locked_sr Brian Norris
2016-01-28 5:51 ` [PATCH 3/8] mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region Brian Norris
2016-01-28 5:51 ` [PATCH 4/8] mtd: spi-nor: disallow further writes to SR if WP# is low Brian Norris
2016-01-28 14:36 ` Ezequiel Garcia
2016-01-28 17:59 ` Brian Norris
2016-01-28 19:24 ` Ezequiel Garcia
2016-01-28 19:48 ` Brian Norris
2016-01-29 13:22 ` Ezequiel Garcia
2016-01-29 19:23 ` Brian Norris
2016-01-28 5:51 ` [PATCH 5/8] mtd: spi-nor: use BIT() for flash_info flags Brian Norris
2016-01-28 5:51 ` [PATCH 6/8] mtd: spi-nor: add SPI_NOR_HAS_LOCK flag Brian Norris
2016-01-28 5:51 ` [RFC PATCH 7/8] mtd: spi-nor: add TB (Top/Bottom) protect support Brian Norris
2016-01-29 2:36 ` Brian Norris
2016-01-28 5:51 ` Brian Norris [this message]
2016-01-28 14:42 ` [PATCH 0/8] mtd: spi-nor: locking fixes and updates Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453960307-10181-9-git-send-email-computersforpeace@gmail.com \
--to=computersforpeace@gmail.com \
--cc=bayi.cheng@mediatek.com \
--cc=boris.brezillon@free-electrons.com \
--cc=djkurtz@chromium.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marex@denx.de \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).