linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	Brian Norris <computersforpeace@gmail.com>,
	Han Xu <han.xu@nxp.com>, Michal Suchanek <hramrach@gmail.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Rafal Milecki <zajec5@gmail.com>, Jagan Teki <jteki@openedev.com>,
	"Andrew F. Davis" <afd@ti.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Gabor Juhos <juhosg@openwrt.org>, Bean Huo <beanhuo@micron.com>,
	linux-kernel@vger.kernel.org,
	Bayi Cheng <bayi.cheng@mediatek.com>,
	Joachim Eastwood <manabian@gmail.com>,
	Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [PATCH v7 06/10] mtd: spi-nor: check return value from write
Date: Thu,  5 May 2016 17:31:52 -0700	[thread overview]
Message-ID: <1462494716-95312-7-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1462494716-95312-1-git-send-email-computersforpeace@gmail.com>

From: Michal Suchanek <hramrach@gmail.com>

SPI NOR hardware drivers now return useful value from their write
functions so check them.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
v6 -> v7:
 * no change

 drivers/mtd/spi-nor/spi-nor.c | 45 ++++++++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f7ffec60a460..dd5c9eb9b9e0 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1062,10 +1062,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		nor->program_opcode = SPINOR_OP_BP;
 
 		/* write one byte. */
-		nor->write(nor, to, 1, retlen, buf);
+		ret = nor->write(nor, to, 1, retlen, buf);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 	}
 	to += actual;
 
@@ -1074,10 +1078,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		nor->program_opcode = SPINOR_OP_AAI_WP;
 
 		/* write two bytes. */
-		nor->write(nor, to, 2, retlen, buf + actual);
+		ret = nor->write(nor, to, 2, retlen, buf + actual);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 		to += 2;
 		nor->sst_write_second = true;
 	}
@@ -1086,21 +1094,24 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	write_disable(nor);
 	ret = spi_nor_wait_till_ready(nor);
 	if (ret)
-		goto time_out;
+		goto sst_write_err;
 
 	/* Write out trailing byte if it exists. */
 	if (actual != len) {
 		write_enable(nor);
 
 		nor->program_opcode = SPINOR_OP_BP;
-		nor->write(nor, to, 1, retlen, buf + actual);
-
+		ret = nor->write(nor, to, 1, retlen, buf + actual);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 		write_disable(nor);
 	}
-time_out:
+sst_write_err:
 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
 	return ret;
 }
@@ -1129,14 +1140,18 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* do all the bytes fit onto one page? */
 	if (page_offset + len <= nor->page_size) {
-		nor->write(nor, to, len, retlen, buf);
+		ret = nor->write(nor, to, len, retlen, buf);
+		if (ret < 0)
+			goto write_err;
 	} else {
 		/* the size of data remaining on the first page */
 		page_size = nor->page_size - page_offset;
-		nor->write(nor, to, page_size, retlen, buf);
+		ret = nor->write(nor, to, page_size, retlen, buf);
+		if (ret < 0)
+			goto write_err;
 
 		/* write everything in nor->page_size chunks */
-		for (i = page_size; i < len; i += page_size) {
+		for (i = ret; i < len; ) {
 			page_size = len - i;
 			if (page_size > nor->page_size)
 				page_size = nor->page_size;
@@ -1147,7 +1162,11 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 			write_enable(nor);
 
-			nor->write(nor, to + i, page_size, retlen, buf + i);
+			ret = nor->write(nor, to + i, page_size, retlen,
+					 buf + i);
+			if (ret < 0)
+				goto write_err;
+			i += ret;
 		}
 	}
 
-- 
2.8.0.rc3.226.g39d4020

  parent reply	other threads:[~2016-05-06  0:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-06  0:31 [PATCH v7 00/10] Add error checking to spi-nor read and write Brian Norris
2016-05-06  0:31 ` [PATCH v7 01/10] mtd: spi-nor: change return value of read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 02/10] mtd: m25p80: return amount of data transferred or error in read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 03/10] mtd: fsl-quadspi: return amount of data read/written or error Brian Norris
2016-05-06  0:31 ` [PATCH v7 04/10] mtd: mtk-quadspi: return amount of data transferred or error in read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 05/10] mtd: nxp-spifi: " Brian Norris
2016-05-06  0:31 ` Brian Norris [this message]
2016-05-06  0:31 ` [PATCH v7 07/10] mtd: spi-nor: stop passing around retlen Brian Norris
2016-05-06  0:31 ` [PATCH v7 08/10] mtd: spi-nor: simplify write loop Brian Norris
2016-05-06  0:31 ` [PATCH v7 09/10] mtd: spi-nor: add read loop Brian Norris
2016-05-06  0:31 ` [PATCH v7 10/10] mtd: m25p80: read in spi_max_transfer_size chunks Brian Norris
2016-05-16 19:47 ` [PATCH v7 00/10] Add error checking to spi-nor read and write Michal Suchanek
2016-05-18  1:24   ` Brian Norris
2016-05-26 20:12     ` Michal Suchanek
2016-05-23 16:08 ` Cyrille Pitchen
2016-06-02  0:26 ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462494716-95312-7-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=afd@ti.com \
    --cc=bayi.cheng@mediatek.com \
    --cc=beanhuo@micron.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=han.xu@nxp.com \
    --cc=hkallweit1@gmail.com \
    --cc=hramrach@gmail.com \
    --cc=javier@osg.samsung.com \
    --cc=jteki@openedev.com \
    --cc=juhosg@openwrt.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=manabian@gmail.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).