linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Kamal Dasu <kdasu.kdev@gmail.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
	linux-mtd@lists.infradead.org, vigneshr@ti.com,
	f.fainelli@gmail.com
Cc: bcm-kernel-feedback-list@broadcom.com,
	vikram.prakash@broadcom.com, andy.fung@broadcom.com,
	jon.mason@broadcom.com, jchandra@broadcom.com,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Subject: [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support
Date: Fri, 29 Jul 2016 18:13:11 -0400	[thread overview]
Message-ID: <1469830393-13295-7-git-send-email-kdasu.kdev@gmail.com> (raw)
In-Reply-To: <1469830393-13295-1-git-send-email-kdasu.kdev@gmail.com>

Adding qspi node compatible with the new spi-bcm-qspi
driver for the broadcom's northstar SoC.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
---
 arch/arm/boot/dts/bcm-nsp.dtsi   | 33 +++++++++++++++++++++++++++++----
 arch/arm/boot/dts/bcm958625k.dts | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6a40ed7..26c863e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		ranges = <0x00000000 0x18000000 0x0011c40a>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -206,9 +206,34 @@
 			brcm,nand-has-wp;
 		};
 
-		rng: rng@33000 {
-			compatible = "brcm,bcm-nsp-rng";
-			reg = <0x33000 0x14>;
+		qspi: qspi@27200 {
+			compatible = "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			clock-frequency = <12500000>;
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		ccbtimer0: timer@34000 {
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2d84226..ab7ba8f 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -126,3 +126,37 @@
 		groups = "nand_grp";
 	};
 };
+
+&qspi {
+	bspi-sel = <0>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@1 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@2 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@3 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
-- 
1.9.1

  parent reply	other threads:[~2016-07-29 22:14 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-29 22:13 [PATCH v5 0/8] Broadcom stb, nsp, ns2, cygnus QSPI driver Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 1/8] Documentation: dt: spi: Add BRCMSTB SoC bindings Kamal Dasu
2016-08-04 21:06   ` Mark Brown
2016-08-04 22:20     ` Florian Fainelli
2016-08-05 11:03       ` Mark Brown
2016-08-16 18:19   ` Mark Brown
2016-08-19 15:07     ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 2/8] spi: bcm-qspi: Add Broadcom MSPI driver Kamal Dasu
2016-08-16 18:15   ` Mark Brown
2016-08-19 15:20     ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 3/8] spi: bcm-qspi: Add BSPI spi-nor flash controller driver Kamal Dasu
2016-08-16 18:31   ` Mark Brown
2016-08-19 15:33     ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 4/8] mtd: m25p80: Let m25p80_read() fallback to spi transfer Kamal Dasu
2016-08-04 21:07   ` Mark Brown
2016-08-19 14:59     ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 5/8] Documentation: dt: spi: Add Broadcom NSP, NS2 SoC bindings Kamal Dasu
2016-08-16 18:32   ` Mark Brown
2016-07-29 22:13 ` Kamal Dasu [this message]
2016-08-01 15:09   ` [PATCH v5 6/8] arm: dts: Add bcm-nsp and bcm958625k support Jonas Gorski
2016-08-02 19:51     ` Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 7/8] arm64: dts: Add ns2 SoC support Kamal Dasu
2016-07-29 22:13 ` [PATCH v5 8/8] spi: nsp-qspi: Add Broadcom NSP, NS2, Cygnus " Kamal Dasu
2016-08-16 18:40   ` Mark Brown
2016-08-19 15:43     ` Kamal Dasu
2016-08-19 16:42       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469830393-13295-7-git-send-email-kdasu.kdev@gmail.com \
    --to=kdasu.kdev@gmail.com \
    --cc=andy.fung@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=broonie@kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jchandra@broadcom.com \
    --cc=jon.mason@broadcom.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vikram.prakash@broadcom.com \
    --cc=yendapally.reddy@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).