From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-mtd@lists.infradead.org
Cc: Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
Lee Jones <lee.jones@linaro.org>,
Peter Tyser <ptyser@xes-inc.com>,
key.seong.lim@intel.com,
Mika Westerberg <mika.westerberg@linux.intel.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/3] spi-nor: Add support for Intel SPI serial flash controller
Date: Mon, 15 Aug 2016 10:10:41 +0300 [thread overview]
Message-ID: <1471245044-12767-1-git-send-email-mika.westerberg@linux.intel.com> (raw)
Hi,
This is third version of the series. Previous versions can be found:
v2: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068277.html
v1: https://lkml.org/lkml/2016/6/14/269
This series adds support for the Intel SPI serial flash controller found on
many recent Intel CPUs including Baytrail and Braswell. This driver makes
it possible to access the BIOS and other platform data which is stored on
the SPI serial flash. It is also possible to upgrade the BIOS using this
driver if it has not been protected by special hardware bits.
The patch [1/3] includes documentation how to upgrade BIOS on MinnowBoard
MAX.
Since poking the SPI serial flash can brick the machine, this driver can
only be enabled when CONFIG_EXPERT=y and even then it will remain read-only
unless instructed othwerwise by module parameter.
Lee can you ACK/NACK the MFD parts so that we can merge the whole series
through the MTD tree?
Changes from v2:
* Rebased on top of v4.8-rc2
* Updated intel_spi_read/write() according spi-nor core changes which
drops retlen parameter and returns number of bytes read/written.
Changes from v1:
[1/3] spi-nor: Add support for Intel SPI serial flash controller
* Older hardware does not support 64k erase command so added erase_64k
flag which is set only for Broxton (BXT).
* Fix protection range offset for Broxton. Now there is ispi->pregs
pointing to the start of the protection registers.
* Change naming of constants from BCR_BYT -> BYT_BCR and so on.
[2/3] mfd: lpc_ich: Add support for SPI serial flash host controller
* Drop lpc_ich_finalize_spi_cell() and initialize cell directly in
lpc_ich_init_spi().
* Use info->type in switch in lpc_ich_init_spi().
* Add defines for magic numbers used in lpc_ich_init_spi().
* Use PLATFORM_DEVID_NONE with mfd_add_devices().
[3/3] mfd: lpc_ich: Add support for Intel Apollo Lake SoC
* No changes
Mika Westerberg (3):
spi-nor: Add support for Intel SPI serial flash controller
mfd: lpc_ich: Add support for SPI serial flash host controller
mfd: lpc_ich: Add support for Intel Apollo Lake SoC
Documentation/mtd/intel-spi.txt | 88 ++++
drivers/mfd/lpc_ich.c | 131 ++++++
drivers/mtd/spi-nor/Kconfig | 20 +
drivers/mtd/spi-nor/Makefile | 2 +
drivers/mtd/spi-nor/intel-spi-platform.c | 57 +++
drivers/mtd/spi-nor/intel-spi.c | 780 +++++++++++++++++++++++++++++++
drivers/mtd/spi-nor/intel-spi.h | 24 +
include/linux/mfd/lpc_ich.h | 3 +
include/linux/platform_data/intel-spi.h | 31 ++
9 files changed, 1136 insertions(+)
create mode 100644 Documentation/mtd/intel-spi.txt
create mode 100644 drivers/mtd/spi-nor/intel-spi-platform.c
create mode 100644 drivers/mtd/spi-nor/intel-spi.c
create mode 100644 drivers/mtd/spi-nor/intel-spi.h
create mode 100644 include/linux/platform_data/intel-spi.h
--
2.8.1
next reply other threads:[~2016-08-15 7:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-15 7:10 Mika Westerberg [this message]
2016-08-15 7:10 ` [PATCH v3 1/3] spi-nor: Add support for Intel SPI serial flash controller Mika Westerberg
2016-08-15 7:10 ` [PATCH v3 2/3] mfd: lpc_ich: Add support for SPI serial flash host controller Mika Westerberg
2016-08-30 9:12 ` Lee Jones
2016-08-15 7:10 ` [PATCH v3 3/3] mfd: lpc_ich: Add support for Intel Apollo Lake SoC Mika Westerberg
2016-08-30 9:08 ` Lee Jones
2016-09-29 13:19 ` Kraemer, Matthias (Ferchau; ADITG/SW1)
2016-09-29 13:29 ` Mika Westerberg
2016-09-29 16:56 ` Lee Jones
2016-08-29 7:11 ` [PATCH v3 0/3] spi-nor: Add support for Intel SPI serial flash controller Mika Westerberg
2016-08-30 9:13 ` Lee Jones
2016-08-30 9:28 ` Mika Westerberg
2016-08-30 10:47 ` Lee Jones
2016-09-12 8:35 ` Mika Westerberg
2016-10-05 9:57 ` Stefan Roese
2016-10-05 10:27 ` Mika Westerberg
2016-10-05 11:11 ` Stefan Roese
2016-10-05 11:18 ` Mika Westerberg
2016-10-05 11:31 ` Stefan Roese
2016-10-05 11:49 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471245044-12767-1-git-send-email-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=key.seong.lim@intel.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=ptyser@xes-inc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).