Re: [PATCH] mtd: nand: Allow MTD_NAND_OMAP2 to be usable on Keystone devices

Boris Brezillon
2016-08-26T07:48:24Z

On Wed, 24 Aug 2016 12:25:00 +0300
Roger Quadros <rogerq@ti.com> wrote:

> Some Keystone devices (e.g. K2G) include a OMAP NAND IP.
> Allow the NAND driver to be usable for both
> Keystone and OMAP devices.
>
> Signed-off-by: Roger Quadros <rogerq@ti.com>

Applied.

Thanks,

Boris

> ---
> drivers/mtd/nand/Kconfig | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 21ff580..e6260df 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -88,11 +88,11 @@ config MTD_NAND_AMS_DELTA
> Support for NAND flash on Amstrad E3 (Delta).
>
> config MTD_NAND_OMAP2
> - tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
> - depends on ARCH_OMAP2PLUS
> + tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
> + depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE)
> help
> - Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
> - platforms.
> + Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
> + and Keystone platforms.
>
> config MTD_NAND_OMAP_BCH
> depends on MTD_NAND_OMAP2