From: "marco_cantu_ranzani@libero.it" <marco_cantu_ranzani@libero.it>
To: linux-mtd@lists.infradead.org
Subject: Re: Re: Error on sync / reboot
Date: Mon, 17 Oct 2011 15:28:05 -0000 [thread overview]
Message-ID: <14846627.1117531318865283953.JavaMail.defaultUser@defaultHost> (raw)
On poweroff:
---------------------------------
UBI error: do_sync_erase: cannot erase PEB 559, error -5
UBI error: erase_worker: failed to erase PEB 559, error -5
UBI: mark PEB 559 as bad
nand_bbt: Error while writing bad block table -5
UBI error: ubi_io_mark_bad: cannot mark PEB 559 bad, error -5
UBI warning: ubi_ro_mode: switch to read-only mode
UBI error: do_work: work failed with error code -5
UBI error: ubi_thread: ubi_bgt0d: work failed with error code -5
UBIFS error (pid 536): ubifs_check_node: bad magic 0x000000, expected
0x6101831
UBIFS error (pid 536): ubifs_check_node: bad node at LEB 11:32720
UBIFS error (pid 536): ubifs_read_node: expected node type 0
UBIFS error (pid 536): ubifs_iget: failed to read inode 143, error -117
UBIFS error (pid 536): ubifs_lookup: dead directory entry 'umount', error -117
UBIFS warning (pid 536): ubifs_ro_mode: switched to read-only mode, error -117
Backtrace:
[<c00304d0>] (dump_backtrace+0x0/0x10c) from [<c03aea9c>]
(dump_stack+0x18/0x1c)
r7:c3a51800 r6:c340e5e0 r5:c343aa00 r4:ffffff8b
[<c03aea84>] (dump_stack+0x0/0x1c) from [<c01668ac>] (ubifs_ro_mode+0x68/0x74)
[<c0166844>] (ubifs_ro_mode+0x0/0x74) from [<c01602d8>]
(ubifs_lookup+0x138/0x148)
[<c01601a0>] (ubifs_lookup+0x0/0x148) from [<c00b3928>]
(do_lookup+0x1a8/0x1c4)
r8:c340e5e0 r7:c3b5bde0 r6:c340b480 r5:c3b5be88 r4:c343aa00
[<c00b3780>] (do_lookup+0x0/0x1c4) from [<c00b54b8>]
(__link_path_walk+0x71c/0xfe0)
[<c00b4d9c>] (__link_path_walk+0x0/0xfe0) from [<c00b5f5c>]
(path_walk+0x50/0xa0)
[<c00b5f0c>] (path_walk+0x0/0xa0) from [<c00b606c>] (do_path_lookup+0x50/0x58)
r7:ffffff9c r6:00000000 r5:c3a59000 r4:c3b5be88
[<c00b601c>] (do_path_lookup+0x0/0x58) from [<c00b6d04>]
(do_filp_open+0xac/0x890)
r7:ffffff9c r6:00020021 r5:c3a59000 r4:00000001
[<c00b6c58>] (do_filp_open+0x0/0x890) from [<c00b0990>] (open_exec+0x2c/0xbc)
[<c00b0964>] (open_exec+0x0/0xbc) from [<c00b0efc>] (do_execve+0xb0/0x334)
r6:c3b49800 r5:c3a59000 r4:00000000
[<c00b0e4c>] (do_execve+0x0/0x334) from [<c002f62c>] (sys_execve+0x3c/0x5c)
[<c002f5f0>] (sys_execve+0x0/0x5c) from [<c002bfa0>]
(ret_fast_syscall+0x0/0x28)
r7:0000000b r6:beb4aa7c r5:40059ef4 r4:00000000
UBIFS error (pid 537): ubifs_check_node: bad magic 0x000000, expected
0x6101831
UBIFS error (pid 537): ubifs_check_node: bad node at LEB 23:1
UBIFS error (pid
537): ubifs_read_node: expected node type 0
UBIFS error (pid 537): ubifs_iget: failed to read inode 863, error -117
UBIFS error (pid 537): ubifs_lookup: dead directory entry 'swapoff', error
-117
The system is going down NOW!
Sent SIGTERM to all processes
UBIFS error (pid 502): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 502): ubifs_read_node: bad node at LEB 395:48992, LEB mapping
status 1
UBIFS error (pid 502): do_readpage: cannot read page 19 of inode 1908, error
-22
UBIFS error (pid 502): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 502): ubifs_read_node: bad node at LEB 395:48992, LEB mapping
status 1
UBIFS error (pid 502): do_readpage: cannot read page 19 of inode 1908, error
-22
reply other threads:[~2011-10-17 15:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=14846627.1117531318865283953.JavaMail.defaultUser@defaultHost \
--to=marco_cantu_ranzani@libero.it \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox