[PATCH v2 1/2] mtd: nand: vf610: Check the return value from clk_prepare_enable()

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <fabio.estevam@nxp.com>

clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes since v1:
- None

 drivers/mtd/nand/vf610_nfc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 744ab10..9e49672 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -814,12 +814,16 @@ static int vf610_nfc_suspend(struct device *dev)
 
 static int vf610_nfc_resume(struct device *dev)
 {
+	int err;
+
 	struct mtd_info *mtd = dev_get_drvdata(dev);
 	struct vf610_nfc *nfc = mtd_to_nfc(mtd);
 
 	pinctrl_pm_select_default_state(dev);
 
-	clk_prepare_enable(nfc->clk);
+	err = clk_prepare_enable(nfc->clk);
+	if (err)
+		return err;
 
 	vf610_nfc_preinit_controller(nfc);
 	vf610_nfc_init_controller(nfc);
-- 
2.7.4