Re: [PATCH] mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o

Boris Brezillon
2017-10-29T19:44:11Z

On Sat, 28 Oct 2017 14:52:23 +0800
<xiaolei.li@mediatek.com> wrote:

> From: Xiaolei Li <xiaolei.li@mediatek.com>
>
> There will get mtk ecc handler during mtk nand probe now.
> If mtk ecc module is not initialized, then mtk nand probe will return
> -EPROBE_DEFER, and retry later.
>
> Change the compile sequence of mtk_nand.o and mtk_ecc.o, initialize mtk
> ecc module before mtk nand module. This makes mtk nand module initialized
> as soon as possible.
>

Applied.

Thanks,

Boris

> Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
> ---
> drivers/mtd/nand/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index ade5fc4..57f4cde 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -58,7 +58,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
> obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
> obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
> obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
> -obj-$(CONFIG_MTD_NAND_MTK) += mtk_nand.o mtk_ecc.o
> +obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
>
> nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
> nand-objs += nand_amd.o