From: Jane Wan <Jane.Wan@nokia.com>
To: Boris.Brezillon@bootlin.com, miquel.raynal@bootlin.com,
dwmw2@infradead.org, computersforpeace@gmail.com, richard@nod.at,
marek.vasut@gmail.com, yamada.masahiro@socionext.com,
prabhakar.kushwaha@nxp.com, shawnguo@kernel.org,
jagdish.gediya@nxp.com, shreeya.patel23498@gmail.com
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
ties.bos@nokia.com, Jane Wan <Jane.Wan@nokia.com>
Subject: [PATCH v3 2/2] mtd: rawnand: fsl_ifc: use bit-wise majority to recover the contents of ONFI parameter
Date: Mon, 7 May 2018 09:34:15 -0700 [thread overview]
Message-ID: <1525710855-8159-1-git-send-email-Jane.Wan@nokia.com> (raw)
Per ONFI specification (Rev. 4.0), if all parameter pages have invalid
CRC values, the bit-wise majority may be used to recover the contents of
the parameter pages from the parameter page copies present.
Signed-off-by: Jane Wan <Jane.Wan@nokia.com>
---
drivers/mtd/nand/raw/nand_base.c | 41 ++++++++++++++++++++++++++++++--------
1 file changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 72f3a89..48f2dec 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5086,15 +5086,18 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
return ret;
}
+#define GET_BIT(bit, val) (((val) >> (bit)) & 0x01)
+
/*
* Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
*/
static int nand_flash_detect_onfi(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_onfi_params *p;
+ struct nand_onfi_params *p = NULL;
char id[4];
- int i, ret, val;
+ int i, ret, val, pagesize;
+ u8 *buf = NULL;
/* Try ONFI for unknown chip or LP */
ret = nand_readid_op(chip, 0x20, id, sizeof(id));
@@ -5102,8 +5105,9 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
return 0;
/* ONFI chip: allocate a buffer to hold its parameter page */
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p)
+ pagesize = sizeof(*p);
+ buf = kzalloc((pagesize * 3), GFP_KERNEL);
+ if (!buf)
return -ENOMEM;
ret = nand_read_param_page_op(chip, 0, NULL, 0);
@@ -5113,7 +5117,8 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
}
for (i = 0; i < 3; i++) {
- ret = nand_read_data_op(chip, p, sizeof(*p), true);
+ p = (struct nand_onfi_params *)&buf[i*pagesize];
+ ret = nand_read_data_op(chip, p, pagesize, true);
if (ret) {
ret = 0;
goto free_onfi_param_page;
@@ -5126,8 +5131,27 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
}
if (i == 3) {
- pr_err("Could not find valid ONFI parameter page; aborting\n");
- goto free_onfi_param_page;
+ int j, k, l;
+ u8 v, m;
+
+ pr_err("Could not find valid ONFI parameter page\n");
+ pr_info("Recover ONFI params with bit-wise majority\n");
+ for (j = 0; j < pagesize; j++) {
+ v = 0;
+ for (k = 0; k < 8; k++) {
+ m = 0;
+ for (l = 0; l < 3; l++)
+ m += GET_BIT(k, buf[l*pagesize + j]);
+ if (m > 1)
+ v |= BIT(k);
+ }
+ ((u8 *)p)[j] = v;
+ }
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) !=
+ le16_to_cpu(p->crc)) {
+ pr_err("ONFI parameter recovery failed, aborting\n");
+ goto free_onfi_param_page;
+ }
}
/* Check version */
@@ -5220,7 +5244,8 @@ static int nand_flash_detect_onfi(struct nand_chip *chip)
sizeof(p->vendor));
free_onfi_param_page:
- kfree(p);
+ if (buf != NULL)
+ kfree(buf);
return ret;
}
--
1.7.9.5
next reply other threads:[~2018-05-07 16:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 16:34 Jane Wan [this message]
2018-05-08 9:08 ` [PATCH v3 2/2] mtd: rawnand: fsl_ifc: use bit-wise majority to recover the contents of ONFI parameter Boris Brezillon
2018-05-08 21:26 ` Wan, Jane (Nokia - US/Sunnyvale)
2018-05-08 13:13 ` Thomas Petazzoni
2018-05-08 21:29 ` Wan, Jane (Nokia - US/Sunnyvale)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1525710855-8159-1-git-send-email-Jane.Wan@nokia.com \
--to=jane.wan@nokia.com \
--cc=Boris.Brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=jagdish.gediya@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=prabhakar.kushwaha@nxp.com \
--cc=richard@nod.at \
--cc=shawnguo@kernel.org \
--cc=shreeya.patel23498@gmail.com \
--cc=ties.bos@nokia.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox