From: Abhishek Sahu <absahu@codeaurora.org>
To: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
Miquel Raynal <miquel.raynal@bootlin.com>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-mtd@lists.infradead.org, Andy Gross <andy.gross@linaro.org>,
Archit Taneja <architt@codeaurora.org>,
Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH v3 13/16] mtd: rawnand: qcom: minor code reorganization for bad block check
Date: Fri, 25 May 2018 17:51:41 +0530 [thread overview]
Message-ID: <1527250904-21988-14-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1527250904-21988-1-git-send-email-absahu@codeaurora.org>
The QCOM NAND controller layout is such that, the bad block byte
offset for last codeword will come to first byte in spare area.
Currently, the raw read for last codeword is being done with
copy_last_cw function. It does following 2 things:
1. Read the last codeword bytes from NAND chip to NAND
controller internal HW buffer.
2. Copy all these bytes from HW buffer to actual buffer.
For bad block check, maximum two bytes are required so instead of
copying the complete bytes in step 2, only those bbm_size bytes
can be copied.
This patch does minor code reorganization for the same. After
this, copy_last_cw function won’t be required.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v2:
1. Changed commit message and comments slightly
* Changes from v1:
NEW CHANGE
drivers/mtd/nand/raw/qcom_nandc.c | 66 +++++++++++++++------------------------
1 file changed, 25 insertions(+), 41 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index d693b5f..f72bc8a 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1769,41 +1769,6 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
return parse_read_errors(host, data_buf_start, oob_buf_start);
}
-/*
- * a helper that copies the last step/codeword of a page (containing free oob)
- * into our local buffer
- */
-static int copy_last_cw(struct qcom_nand_host *host, int page)
-{
- struct nand_chip *chip = &host->chip;
- struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int size;
- int ret;
-
- clear_read_regs(nandc);
-
- size = host->use_ecc ? host->cw_data : host->cw_size;
-
- /* prepare a clean read buffer */
- memset(nandc->data_buffer, 0xff, size);
-
- set_address(host, host->cw_size * (ecc->steps - 1), page);
- update_rw_regs(host, 1, true);
-
- config_nand_single_cw_page_read(nandc);
-
- read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
-
- ret = submit_descs(nandc);
- if (ret)
- dev_err(nandc->dev, "failed to copy last codeword\n");
-
- free_descs(nandc);
-
- return ret;
-}
-
/* implements ecc->read_page() */
static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
@@ -2118,6 +2083,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
struct nand_ecc_ctrl *ecc = &chip->ecc;
int page, ret, bbpos, bad = 0;
u32 flash_status;
+ u8 *bbm_bytes_buf = chip->data_buf;
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -2128,11 +2094,31 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
* that contains the BBM
*/
host->use_ecc = false;
+ bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
clear_bam_transaction(nandc);
- ret = copy_last_cw(host, page);
- if (ret)
+ clear_read_regs(nandc);
+
+ set_address(host, host->cw_size * (ecc->steps - 1), page);
+ update_rw_regs(host, 1, true);
+
+ /*
+ * The last codeword data will be copied from NAND device to NAND
+ * controller internal HW buffer. Copy only required BBM size bytes
+ * from this HW buffer to bbm_bytes_buf which is present at
+ * bbpos offset.
+ */
+ nandc_set_read_loc(nandc, 0, bbpos, host->bbm_size, 1);
+ config_nand_single_cw_page_read(nandc);
+ read_data_dma(nandc, FLASH_BUF_ACC + bbpos, bbm_bytes_buf,
+ host->bbm_size, 0);
+
+ ret = submit_descs(nandc);
+ free_descs(nandc);
+ if (ret) {
+ dev_err(nandc->dev, "failed to copy bad block bytes\n");
goto err;
+ }
flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
@@ -2141,12 +2127,10 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
goto err;
}
- bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
-
- bad = nandc->data_buffer[bbpos] != 0xff;
+ bad = bbm_bytes_buf[0] != 0xff;
if (chip->options & NAND_BUSWIDTH_16)
- bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff);
+ bad = bad || (bbm_bytes_buf[1] != 0xff);
err:
return bad;
}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2018-05-25 12:23 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 12:21 [PATCH v3 00/16] Update for QCOM NAND driver Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 01/16] mtd: rawnand: helper function for setting up ECC configuration Abhishek Sahu
2018-05-26 8:42 ` Miquel Raynal
2018-05-28 5:46 ` Abhishek Sahu
2018-06-07 12:37 ` Miquel Raynal
2018-06-11 9:16 ` Abhishek Sahu
2018-06-18 10:04 ` Miquel Raynal
2018-05-29 19:30 ` Boris Brezillon
2018-05-30 0:28 ` Masahiro Yamada
2018-05-30 6:21 ` Abhishek Sahu
2018-05-30 7:38 ` Masahiro Yamada
2018-05-30 8:53 ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 02/16] mtd: rawnand: denali: use helper function for ecc setup Abhishek Sahu
2018-05-27 9:26 ` Masahiro Yamada
2018-05-25 12:21 ` [PATCH v3 03/16] dt-bindings: qcom_nandc: make nand-ecc-strength optional Abhishek Sahu
2018-05-26 8:42 ` Miquel Raynal
2018-05-28 5:53 ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 04/16] dt-bindings: qcom_nandc: remove nand-ecc-step-size Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 05/16] mtd: rawnand: qcom: remove dt property nand-ecc-step-size Abhishek Sahu
2018-05-26 8:42 ` Miquel Raynal
2018-05-28 5:55 ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 06/16] mtd: rawnand: qcom: use the ecc strength from device parameter Abhishek Sahu
2018-05-26 8:43 ` Miquel Raynal
2018-05-28 6:01 ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 07/16] mtd: rawnand: qcom: wait for desc completion in all BAM channels Abhishek Sahu
2018-05-26 8:43 ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 08/16] mtd: rawnand: qcom: erased page detection for uncorrectable errors only Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 09/16] mtd: rawnand: qcom: fix null pointer access for erased page detection Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 10/16] mtd: rawnand: qcom: parse read errors for read oob also Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 11/16] mtd: rawnand: qcom: modify write_oob to remove read codeword part Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 12/16] mtd: rawnand: qcom: fix return value for raw page read Abhishek Sahu
2018-05-26 8:43 ` Miquel Raynal
2018-05-25 12:21 ` Abhishek Sahu [this message]
2018-05-26 8:46 ` [PATCH v3 13/16] mtd: rawnand: qcom: minor code reorganization for bad block check Miquel Raynal
2018-05-28 6:12 ` Abhishek Sahu
2018-05-28 7:03 ` Miquel Raynal
2018-05-28 10:10 ` Abhishek Sahu
2018-06-07 12:53 ` Miquel Raynal
2018-06-11 13:22 ` Abhishek Sahu
2018-06-18 11:35 ` Miquel Raynal
2018-06-20 7:04 ` Abhishek Sahu
2018-05-26 8:58 ` Miquel Raynal
2018-05-28 6:16 ` Abhishek Sahu
2018-05-28 7:09 ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 14/16] mtd: rawnand: qcom: check for operation errors in case of raw read Abhishek Sahu
2018-05-26 8:58 ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 15/16] mtd: rawnand: qcom: helper function for " Abhishek Sahu
2018-05-27 13:53 ` Miquel Raynal
2018-05-28 7:34 ` Abhishek Sahu
2018-06-07 12:43 ` Miquel Raynal
2018-06-11 9:19 ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 16/16] mtd: rawnand: qcom: erased page bitflips detection Abhishek Sahu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527250904-21988-14-git-send-email-absahu@codeaurora.org \
--to=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=architt@codeaurora.org \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=dwmw2@infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).