linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Abhishek Sahu <absahu@codeaurora.org>
To: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, Andy Gross <andy.gross@linaro.org>,
	Archit Taneja <architt@codeaurora.org>,
	Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH v3 14/16] mtd: rawnand: qcom: check for operation errors in case of raw read
Date: Fri, 25 May 2018 17:51:42 +0530	[thread overview]
Message-ID: <1527250904-21988-15-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1527250904-21988-1-git-send-email-absahu@codeaurora.org>

Currently there is no error checking for raw read. For raw
reads, there won’t be any ECC failure but the operational
failures are possible, so schedule the NAND_FLASH_STATUS read
after each codeword.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v2:
  NONE

* Changes from v1:
 1. Removed the code for copy_last_cw.

 drivers/mtd/nand/raw/qcom_nandc.c | 58 +++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 18 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f72bc8a..87f900e 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1096,7 +1096,8 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc)
  * Helper to prepare DMA descriptors for configuring registers
  * before reading each codeword in NAND page.
  */
-static void config_nand_cw_read(struct qcom_nand_controller *nandc)
+static void
+config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc)
 {
 	if (nandc->props->is_bam)
 		write_reg_dma(nandc, NAND_READ_LOCATION_0, 4,
@@ -1105,19 +1106,25 @@ static void config_nand_cw_read(struct qcom_nand_controller *nandc)
 	write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL);
 	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
 
-	read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
-	read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
-		     NAND_BAM_NEXT_SGL);
+	if (use_ecc) {
+		read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0);
+		read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1,
+			     NAND_BAM_NEXT_SGL);
+	} else {
+		read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
+	}
 }
 
 /*
  * Helper to prepare dma descriptors to configure registers needed for reading a
  * single codeword in page
  */
-static void config_nand_single_cw_page_read(struct qcom_nand_controller *nandc)
+static void
+config_nand_single_cw_page_read(struct qcom_nand_controller *nandc,
+				bool use_ecc)
 {
 	config_nand_page_read(nandc);
-	config_nand_cw_read(nandc);
+	config_nand_cw_read(nandc, use_ecc);
 }
 
 /*
@@ -1198,7 +1205,7 @@ static int nandc_param(struct qcom_nand_host *host)
 	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
-	config_nand_single_cw_page_read(nandc);
+	config_nand_single_cw_page_read(nandc, false);
 
 	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer,
 		      nandc->buf_count, 0);
@@ -1563,6 +1570,23 @@ struct read_stats {
 	__le32 erased_cw;
 };
 
+/* reads back FLASH_STATUS register set by the controller */
+static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt)
+{
+	struct nand_chip *chip = &host->chip;
+	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
+	int i;
+
+	for (i = 0; i < cw_cnt; i++) {
+		u32 flash = le32_to_cpu(nandc->reg_read_buf[i]);
+
+		if (flash & (FS_OP_ERR | FS_MPU_ERR))
+			return -EIO;
+	}
+
+	return 0;
+}
+
 /*
  * reads back status registers set by the controller to notify page read
  * errors. this is equivalent to what 'ecc->correct()' would do.
@@ -1729,7 +1753,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 			}
 		}
 
-		config_nand_cw_read(nandc);
+		config_nand_cw_read(nandc, true);
 
 		if (data_buf)
 			read_data_dma(nandc, FLASH_BUF_ACC, data_buf,
@@ -1839,7 +1863,7 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
 			nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1);
 		}
 
-		config_nand_cw_read(nandc);
+		config_nand_cw_read(nandc, false);
 
 		read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
 		reg_off += data_size1;
@@ -1858,12 +1882,13 @@ static int qcom_nandc_read_page_raw(struct mtd_info *mtd,
 	}
 
 	ret = submit_descs(nandc);
-	if (ret)
+	free_descs(nandc);
+	if (ret) {
 		dev_err(nandc->dev, "failure to read raw page\n");
+		return ret;
+	}
 
-	free_descs(nandc);
-
-	return ret;
+	return check_flash_errors(host, ecc->steps);
 }
 
 /* implements ecc->read_oob() */
@@ -2082,7 +2107,6 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int page, ret, bbpos, bad = 0;
-	u32 flash_status;
 	u8 *bbm_bytes_buf = chip->data_buf;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
@@ -2109,7 +2133,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	 * bbpos offset.
 	 */
 	nandc_set_read_loc(nandc, 0, bbpos, host->bbm_size, 1);
-	config_nand_single_cw_page_read(nandc);
+	config_nand_single_cw_page_read(nandc, host->use_ecc);
 	read_data_dma(nandc, FLASH_BUF_ACC + bbpos, bbm_bytes_buf,
 		      host->bbm_size, 0);
 
@@ -2120,9 +2144,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 		goto err;
 	}
 
-	flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
-
-	if (flash_status & (FS_OP_ERR | FS_MPU_ERR)) {
+	if (check_flash_errors(host, 1)) {
 		dev_warn(nandc->dev, "error when trying to read BBM\n");
 		goto err;
 	}
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-05-25 12:23 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25 12:21 [PATCH v3 00/16] Update for QCOM NAND driver Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 01/16] mtd: rawnand: helper function for setting up ECC configuration Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-28  5:46     ` Abhishek Sahu
2018-06-07 12:37       ` Miquel Raynal
2018-06-11  9:16         ` Abhishek Sahu
2018-06-18 10:04           ` Miquel Raynal
2018-05-29 19:30     ` Boris Brezillon
2018-05-30  0:28       ` Masahiro Yamada
2018-05-30  6:21         ` Abhishek Sahu
2018-05-30  7:38           ` Masahiro Yamada
2018-05-30  8:53             ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 02/16] mtd: rawnand: denali: use helper function for ecc setup Abhishek Sahu
2018-05-27  9:26   ` Masahiro Yamada
2018-05-25 12:21 ` [PATCH v3 03/16] dt-bindings: qcom_nandc: make nand-ecc-strength optional Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-28  5:53     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 04/16] dt-bindings: qcom_nandc: remove nand-ecc-step-size Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 05/16] mtd: rawnand: qcom: remove dt property nand-ecc-step-size Abhishek Sahu
2018-05-26  8:42   ` Miquel Raynal
2018-05-28  5:55     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 06/16] mtd: rawnand: qcom: use the ecc strength from device parameter Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-28  6:01     ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 07/16] mtd: rawnand: qcom: wait for desc completion in all BAM channels Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 08/16] mtd: rawnand: qcom: erased page detection for uncorrectable errors only Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 09/16] mtd: rawnand: qcom: fix null pointer access for erased page detection Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 10/16] mtd: rawnand: qcom: parse read errors for read oob also Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 11/16] mtd: rawnand: qcom: modify write_oob to remove read codeword part Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 12/16] mtd: rawnand: qcom: fix return value for raw page read Abhishek Sahu
2018-05-26  8:43   ` Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 13/16] mtd: rawnand: qcom: minor code reorganization for bad block check Abhishek Sahu
2018-05-26  8:46   ` Miquel Raynal
2018-05-28  6:12     ` Abhishek Sahu
2018-05-28  7:03       ` Miquel Raynal
2018-05-28 10:10         ` Abhishek Sahu
2018-06-07 12:53           ` Miquel Raynal
2018-06-11 13:22             ` Abhishek Sahu
2018-06-18 11:35               ` Miquel Raynal
2018-06-20  7:04                 ` Abhishek Sahu
2018-05-26  8:58   ` Miquel Raynal
2018-05-28  6:16     ` Abhishek Sahu
2018-05-28  7:09       ` Miquel Raynal
2018-05-25 12:21 ` Abhishek Sahu [this message]
2018-05-26  8:58   ` [PATCH v3 14/16] mtd: rawnand: qcom: check for operation errors in case of raw read Miquel Raynal
2018-05-25 12:21 ` [PATCH v3 15/16] mtd: rawnand: qcom: helper function for " Abhishek Sahu
2018-05-27 13:53   ` Miquel Raynal
2018-05-28  7:34     ` Abhishek Sahu
2018-06-07 12:43       ` Miquel Raynal
2018-06-11  9:19         ` Abhishek Sahu
2018-05-25 12:21 ` [PATCH v3 16/16] mtd: rawnand: qcom: erased page bitflips detection Abhishek Sahu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1527250904-21988-15-git-send-email-absahu@codeaurora.org \
    --to=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=architt@codeaurora.org \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).