linux-mtd.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: Joakim.Tjernlund@infinera.com, boris.brezillon@bootlin.com,
	boris.brezillon@free-electrons.com,
	chris.packham@alliedtelesis.co.nz, computersforpeace@gmail.com,
	cyrille.pitchen@wedev4u.fr, dwmw2@infradead.org,
	gregkh@linuxfoundation.org, ikegami@allied-telesis.co.jp,
	linux-mtd@lists.infradead.org, marek.vasut@gmail.com,
	richard@nod.at
Cc: <stable-commits@vger.kernel.org>
Subject: Patch "mtd: cfi_cmdset_0002: Change erase functions to check chip good only" has been added to the 4.4-stable tree
Date: Tue, 10 Jul 2018 16:51:50 +0200	[thread overview]
Message-ID: <1531234310160152@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    mtd: cfi_cmdset_0002: Change erase functions to check chip good only

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     mtd-cfi_cmdset_0002-change-erase-functions-to-check-chip-good-only.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 79ca484b613041ca223f74b34608bb6f5221724b Mon Sep 17 00:00:00 2001
From: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Date: Wed, 30 May 2018 18:32:29 +0900
Subject: mtd: cfi_cmdset_0002: Change erase functions to check chip good only

From: Tokunori Ikegami <ikegami@allied-telesis.co.jp>

commit 79ca484b613041ca223f74b34608bb6f5221724b upstream.

Currently the functions use to check both chip ready and good.
But the chip ready is not enough to check the operation status.
So change this to check the chip good instead of this.
About the retry functions to make sure the error handling remain it.

Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: linux-mtd@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/mtd/chips/cfi_cmdset_0002.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -2294,12 +2294,13 @@ static int __xipram do_erase_chip(struct
 			chip->erase_suspended = 0;
 		}
 
-		if (chip_ready(map, adr))
+		if (chip_good(map, adr, map_word_ff(map)))
 			break;
 
 		if (time_after(jiffies, timeo)) {
 			printk(KERN_WARNING "MTD %s(): software timeout\n",
 				__func__ );
+			ret = -EIO;
 			break;
 		}
 
@@ -2307,15 +2308,15 @@ static int __xipram do_erase_chip(struct
 		UDELAY(map, chip, adr, 1000000/HZ);
 	}
 	/* Did we succeed? */
-	if (!chip_good(map, adr, map_word_ff(map))) {
+	if (ret) {
 		/* reset on all failures. */
 		map_write( map, CMD(0xF0), chip->start );
 		/* FIXME - should have reset delay before continuing */
 
-		if (++retry_cnt <= MAX_RETRIES)
+		if (++retry_cnt <= MAX_RETRIES) {
+			ret = 0;
 			goto retry;
-
-		ret = -EIO;
+		}
 	}
 
 	chip->state = FL_READY;
@@ -2389,7 +2390,7 @@ static int __xipram do_erase_oneblock(st
 			chip->erase_suspended = 0;
 		}
 
-		if (chip_ready(map, adr)) {
+		if (chip_good(map, adr, map_word_ff(map))) {
 			xip_enable(map, chip, adr);
 			break;
 		}
@@ -2398,6 +2399,7 @@ static int __xipram do_erase_oneblock(st
 			xip_enable(map, chip, adr);
 			printk(KERN_WARNING "MTD %s(): software timeout\n",
 				__func__ );
+			ret = -EIO;
 			break;
 		}
 
@@ -2405,15 +2407,15 @@ static int __xipram do_erase_oneblock(st
 		UDELAY(map, chip, adr, 1000000/HZ);
 	}
 	/* Did we succeed? */
-	if (!chip_good(map, adr, map_word_ff(map))) {
+	if (ret) {
 		/* reset on all failures. */
 		map_write( map, CMD(0xF0), chip->start );
 		/* FIXME - should have reset delay before continuing */
 
-		if (++retry_cnt <= MAX_RETRIES)
+		if (++retry_cnt <= MAX_RETRIES) {
+			ret = 0;
 			goto retry;
-
-		ret = -EIO;
+		}
 	}
 
 	chip->state = FL_READY;


Patches currently in stable-queue which might be from ikegami@allied-telesis.co.jp are

queue-4.4/mtd-cfi_cmdset_0002-change-erase-functions-to-retry-for-error.patch
queue-4.4/mtd-cfi_cmdset_0002-change-erase-functions-to-check-chip-good-only.patch
queue-4.4/mtd-cfi_cmdset_0002-change-definition-naming-to-retry-write-operation.patch

                 reply	other threads:[~2018-07-10 14:52 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1531234310160152@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=Joakim.Tjernlund@infinera.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=computersforpeace@gmail.com \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=dwmw2@infradead.org \
    --cc=ikegami@allied-telesis.co.jp \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    --cc=stable-commits@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).