From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
To: <boris.brezillon@bootlin.com>, <miquel.raynal@bootlin.com>,
<richard@nod.at>, <dwmw2@infradead.org>,
<computersforpeace@gmail.com>, <marek.vasut@gmail.com>,
<michals@xilinx.com>
Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<nagasuresh12@gmail.com>, <robh@kernel.org>,
Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Subject: [LINUX PATCH v12 2/3] mtd: rawnand: Add an option to get sdr timing mode number
Date: Fri, 9 Nov 2018 10:30:40 +0530 [thread overview]
Message-ID: <1541739641-17789-3-git-send-email-naga.sureshkumar.relli@xilinx.com> (raw)
In-Reply-To: <1541739641-17789-1-git-send-email-naga.sureshkumar.relli@xilinx.com>
Some NAND controllers need SDR timing mode value, instead of timings.
i.e the NAND controller will change its operating mode by
just configuring the sdr timing mode number. So add a mode field to
struct nand_sdr_timings
Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changes in v12:
- Typo corrections as suggested by Boris
Changes in v11:
- None
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- None
Changes in v7:
- None
Changes in v6:
- None
Changes in v5:
- None
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
---
drivers/mtd/nand/raw/nand_timings.c | 6 ++++++
include/linux/mtd/rawnand.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/raw/nand_timings.c b/drivers/mtd/nand/raw/nand_timings.c
index bea3062..500c16b 100644
--- a/drivers/mtd/nand/raw/nand_timings.c
+++ b/drivers/mtd/nand/raw/nand_timings.c
@@ -57,6 +57,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 120000,
.tWP_min = 50000,
.tWW_min = 100000,
+ .mode = 0,
},
},
/* Mode 1 */
@@ -99,6 +100,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 80000,
.tWP_min = 25000,
.tWW_min = 100000,
+ .mode = 1,
},
},
/* Mode 2 */
@@ -141,6 +143,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 80000,
.tWP_min = 17000,
.tWW_min = 100000,
+ .mode = 2,
},
},
/* Mode 3 */
@@ -183,6 +186,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 80000,
.tWP_min = 15000,
.tWW_min = 100000,
+ .mode = 3,
},
},
/* Mode 4 */
@@ -225,6 +229,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 80000,
.tWP_min = 12000,
.tWW_min = 100000,
+ .mode = 4,
},
},
/* Mode 5 */
@@ -267,6 +272,7 @@ static const struct nand_data_interface onfi_sdr_timings[] = {
.tWHR_min = 80000,
.tWP_min = 10000,
.tWW_min = 100000,
+ .mode = 5,
},
},
};
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index e10b126..223b656 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -466,6 +466,7 @@ struct nand_ecc_ctrl {
* @tWHR_min: WE# high to RE# low
* @tWP_min: WE# pulse width
* @tWW_min: WP# transition to WE# low
+ * @mode: sdr timing mode value
*/
struct nand_sdr_timings {
u64 tBERS_max;
@@ -506,6 +507,7 @@ struct nand_sdr_timings {
u32 tWHR_min;
u32 tWP_min;
u32 tWW_min;
+ u32 mode;
};
/**
--
2.7.4
next prev parent reply other threads:[~2018-11-09 5:01 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 5:00 [LINUX PATCH v12 0/3] Add support for Arasan NAND Flash controller Naga Sureshkumar Relli
2018-11-09 5:00 ` [LINUX PATCH v12 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation Naga Sureshkumar Relli
2018-11-09 6:28 ` Boris Brezillon
2018-11-09 12:33 ` Naga Sureshkumar Relli
2018-11-09 12:54 ` Miquel Raynal
2018-11-09 13:19 ` Naga Sureshkumar Relli
2018-11-16 11:50 ` Martin Lund
2018-11-16 12:10 ` Martin Lund
2018-11-16 12:33 ` Michal Simek
2018-11-16 13:50 ` Naga Sureshkumar Relli
2018-11-16 14:22 ` Martin Lund
2018-11-09 5:00 ` Naga Sureshkumar Relli [this message]
2018-11-09 5:00 ` [LINUX PATCH v12 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller Naga Sureshkumar Relli
2018-11-09 8:07 ` Boris Brezillon
2018-11-09 13:18 ` Naga Sureshkumar Relli
2018-11-09 23:03 ` kbuild test robot
2018-11-12 10:55 ` Martin Lund
2018-11-12 10:58 ` Boris Brezillon
2018-11-12 12:43 ` Naga Sureshkumar Relli
2018-11-15 9:34 ` Naga Sureshkumar Relli
2018-11-18 18:52 ` Miquel Raynal
2018-11-18 19:43 ` Boris Brezillon
2018-11-19 6:20 ` Naga Sureshkumar Relli
2018-11-19 8:02 ` Boris Brezillon
2018-11-20 7:02 ` Naga Sureshkumar Relli
2018-11-20 11:02 ` Boris Brezillon
2018-11-20 12:36 ` Miquel Raynal
2018-11-23 13:53 ` Naga Sureshkumar Relli
2018-12-12 5:27 ` Naga Sureshkumar Relli
2018-12-12 8:11 ` Miquel Raynal
2018-12-12 9:04 ` Naga Sureshkumar Relli
2018-12-12 9:09 ` Miquel Raynal
2018-12-12 13:07 ` Naga Sureshkumar Relli
2018-12-12 13:18 ` Miquel Raynal
2018-12-17 13:21 ` Naga Sureshkumar Relli
2018-12-17 16:41 ` Miquel Raynal
2018-12-18 5:33 ` Naga Sureshkumar Relli
2018-12-19 14:26 ` Miquel Raynal
2018-12-21 7:36 ` Naga Sureshkumar Relli
2019-01-28 6:04 ` Naga Sureshkumar Relli
2019-01-28 9:27 ` Miquel Raynal
2019-01-28 9:35 ` Naga Sureshkumar Relli
2019-06-19 4:44 ` Naga Sureshkumar Relli
2019-06-27 16:27 ` Miquel Raynal
2019-06-28 4:20 ` Naga Sureshkumar Relli
2018-11-15 16:45 ` Dan Carpenter
2018-11-20 16:24 ` Boris Brezillon
2018-12-04 9:18 ` Naga Sureshkumar Relli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541739641-17789-3-git-send-email-naga.sureshkumar.relli@xilinx.com \
--to=naga.sureshkumar.relli@xilinx.com \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=michals@xilinx.com \
--cc=miquel.raynal@bootlin.com \
--cc=nagasuresh12@gmail.com \
--cc=richard@nod.at \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).