From: thor.thayer@linux.intel.com
To: marek.vasut@gmail.com, dwmw2@infradead.org,
computersforpeace@gmail.com, boris.brezillon@bootlin.com,
richard@nod.at
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Thor Thayer <thor.thayer@linux.intel.com>
Subject: [PATCH] mtd: spi-nor: Fix Cadence QSPI page fault kernel panic
Date: Tue, 13 Nov 2018 11:32:25 -0600 [thread overview]
Message-ID: <1542130345-10005-1-git-send-email-thor.thayer@linux.intel.com> (raw)
From: Thor Thayer <thor.thayer@linux.intel.com>
The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[ 11.202044] Unable to handle kernel paging request at virtual address bffd3000
[ 11.209254] pgd = e463054d
[ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000
[ 11.218202] Internal error: Oops: 7 [#1] SMP ARM
[ 11.222797] Modules linked in:
[ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f
[ 11.235796] Hardware name: Altera SOCFPGA Arria10
[ 11.240487] PC is at __raw_writesl+0x70/0xd4
[ 11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.
This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer. A min() function is
used to limit the length to prevent buffer indexing overflows.
Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
drivers/mtd/spi-nor/cadence-quadspi.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
index d846428ef038..3659d94b4d2f 100644
--- a/drivers/mtd/spi-nor/cadence-quadspi.c
+++ b/drivers/mtd/spi-nor/cadence-quadspi.c
@@ -644,9 +644,23 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
ndelay(cqspi->wr_delay);
while (remaining > 0) {
+ size_t write_words, mod_bytes;
+
write_bytes = remaining > page_size ? page_size : remaining;
- iowrite32_rep(cqspi->ahb_base, txbuf,
- DIV_ROUND_UP(write_bytes, 4));
+ write_words = write_bytes / 4;
+ mod_bytes = write_bytes % 4;
+ /* Write 4 bytes at a time then single bytes. */
+ if (write_words) {
+ iowrite32_rep(cqspi->ahb_base, txbuf, write_words);
+ txbuf += (write_words * 4);
+ }
+ if (mod_bytes) {
+ unsigned int temp = 0xFFFFFFFF;
+
+ memcpy(&temp, txbuf, min(sizeof(temp), mod_bytes));
+ iowrite32(temp, cqspi->ahb_base);
+ txbuf += mod_bytes;
+ }
if (!wait_for_completion_timeout(&cqspi->transfer_complete,
msecs_to_jiffies(CQSPI_TIMEOUT_MS))) {
@@ -655,7 +669,6 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
goto failwr;
}
- txbuf += write_bytes;
remaining -= write_bytes;
if (remaining > 0)
--
2.7.4
next reply other threads:[~2018-11-13 17:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 17:32 thor.thayer [this message]
2018-11-14 12:00 ` [PATCH] mtd: spi-nor: Fix Cadence QSPI page fault kernel panic Vignesh R
2018-11-14 15:25 ` Thor Thayer
-- strict thread matches above, loose matches on Subject: below --
2018-04-23 17:22 thor.thayer
2018-04-23 17:44 ` Thor Thayer
2018-03-19 18:45 thor.thayer
2018-03-19 22:33 ` Marek Vasut
2018-03-21 15:15 ` Thor Thayer
2018-03-20 8:15 ` kbuild test robot
2018-03-20 10:31 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542130345-10005-1-git-send-email-thor.thayer@linux.intel.com \
--to=thor.thayer@linux.intel.com \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox